Electrical help for homes and businessesRequest service
Emergency ElectricianCall (954) 481-0910
Emergency Electrician technician installing a pendant light in a bright coastal home

Emergencies

Ceiling Light Is Smoking or Dripping Melted Parts

A fixture that smokes, smells of burning, or drips melted plastic is overheating above your head, where fire can spread into the ceiling space unseen. Switch off the light, take the power off at the breaker, and keep clear. Here is what to do and what causes it.

What you are seeing and why it is serious

Ceiling fixtures sit in a hidden space. Above the visible lens or trim is a cavity with wiring, insulation, wood framing, and often years of dust. A fixture that overheats puts heat into that space. If you can see smoke or dripping material, the temperature at the fixture has already passed the point where plastics and insulation break down.

Smoke from a light is not always from fire. It can come from dust burning off a hot surface, from melting plastic parts, or from overheated wire insulation. But it can also be the start of a fire in the ceiling cavity, which spreads out of sight. That is why a smoking fixture is treated as an emergency until proven otherwise.

Dripping material is a particular hazard. Melted plastic or wire insulation falling from a ceiling can land on furniture, bedding and people, and it may be hot enough to burn. It may also be burning as it falls. Keep children, pets and anyone vulnerable away from the area, and do not stand directly under the fixture.

Emergency Electrician technician repairing and testing a wall outlet in a South Florida home

What to do right now

If you see flames, active smoke filling the room, or the ceiling itself looks scorched, leave the home and call 911. Do not stay to find the breaker. Close doors behind you if you can do so without delay, since closed doors slow fire spread.

If the smoke is light, there are no flames, and you are safe, switch off the wall switch first, since that is quick, then go to the panel and switch off the breaker that feeds the room. Using the breaker matters because a wall switch only breaks one conductor in many circuits, and in some wiring layouts the fixture stays energized even with the switch off.

Once the power is off, do not touch the fixture. It may be extremely hot, and the glass or plastic may be fragile. Do not spray water on it or on the ceiling, since water and an energized circuit are a dangerous mix, and a wet ceiling can also hide the problem. Keep the area clear, open a window if the smell is strong and it is safe to do so, and call.

  1. If flames or heavy smoke: leave and call 911.
  2. Switch off the wall switch, then the room breaker, from a dry position.
  3. Keep people and pets out from under the fixture.
  4. Do not touch the fixture or spray water at it.
  5. Open a window for ventilation if the smell is strong and it is safe.
  6. Call and describe what you saw and smelled.

Wrong bulbs: the most common cause

Every fixture has a label stating the maximum wattage of bulb it can safely hold. That limit is set by how much heat the fixture can shed. A bulb above the limit produces more heat than the fixture is designed to manage, and the excess goes into the socket, the wire insulation and the housing. Over weeks or months, the socket turns brown, the wire jackets go stiff, and plastic parts soften or melt.

People often replace a lamp's bulbs with a stronger one because the room seems dim, without checking the label. Others use a bulb whose shape does not suit the fixture, such as a bulb that traps heat in an enclosed globe. Halogen bulbs run far hotter than most others, and they are a frequent cause in fixtures that were designed for a different type.

Using LED bulbs designed for the fixture type can reduce heat greatly. But even LED bulbs can overheat when placed in a fully enclosed fixture that traps the heat from their electronics, so check that the bulb is rated for enclosed fixtures if yours is enclosed. If the bulb is cooking itself in a closed dome, that heat also goes into the socket.

  • Bulb wattage above the label on the fixture
  • Halogen bulbs in fixtures built for other types
  • Non-enclosed LED bulbs in sealed globes
  • Dirty or dusty housings that hold heat
  • Several bulbs in a fixture, each at the limit

Insulation contact in recessed fixtures

Recessed lights, sometimes called can lights, sit up inside the ceiling and are surrounded by the materials of the attic. Some are designed to be in contact with insulation. Others need clearance, because they run hot and insulation next to them traps that heat. A fixture that was never meant to touch insulation and now has insulation piled against it can overheat, and the insulation itself can scorch or ignite.

Over time, attic insulation shifts, gets added by a different contractor, or is blown in without regard to the fixtures. In older homes in South Florida, attic spaces may also hold dust, debris and nesting materials that sit near a hot housing. Any of this can turn a normal operating temperature into a hazard.

Many recessed fixtures have a thermal protector inside that shuts the light off when it gets too hot. If your recessed light goes on and off by itself, it may be cycling on that protector. That is a symptom to take seriously, since it means heat is building and something is not right, whether it is the bulb, the insulation, or the fixture.

Other causes behind the smoke

Wire insulation that has aged or been overheated can break down inside the fixture box. Wire nuts that were not tightened, or connections made with the wrong materials, produce heat at the splices. A loose connection in a ceiling box can also arc, which produces a smell, a crackle and sometimes smoke.

Sockets themselves wear out. The contact tab at the base of the socket loses tension, and the bulb no longer touches firmly. The result is a hot, arcing connection at the center of the socket, often with a brown or black scorch mark. Sockets in fixtures with vibration, for example from ceiling fans, are especially vulnerable.

Ballasts and drivers are electronic parts in fluorescent and LED fixtures. They can fail and overheat, producing a burning smell, a hot spot on the housing and sometimes smoke. A failing ballast in older fluorescent lights can also leak a tar-like material, which drips from the fixture and can be hot. Do not touch it. Our page on urgent ceiling fan and fixture faults describes repairs for these cases.

Moisture, leaks and fixtures that drip

Not all dripping is melted material. A leak from a roof or an upstairs bathroom can send water through a ceiling and into a fixture. Water pooling in a dome and dripping out can look like melting, especially if it carries stains or dust. A fixture holding water is also a shock and short circuit hazard.

If liquid is dripping from a light, treat it as a combined water and electrical hazard. Switch off the breaker, keep away from the area, and do not try to collect the liquid from directly underneath. If it is a leak, there may be more water above the ceiling, and a sagging ceiling can collapse. Our page on wet attic and ceiling lights after a storm covers this in more detail.

Whether the liquid is water or melted material, the response is the same: power off, keep clear, and have a qualified person assess it before the circuit is energized again.

What a technician checks

After confirming the circuit is off, the technician examines the fixture from below, noting scorch marks, melted parts, the smell and the type of bulb. They then open the fixture, or remove it from the ceiling, to see the wiring and box above. They check the socket, wire insulation, connections and the condition of the box.

If the fixture is recessed, they may go up into the attic to check for insulation contact, scorched wood, debris and any other signs of heat on the structure. The wood framing around the fixture is looked at carefully, because charring can occur without visible flames.

Repairs vary. A simple case may need a new socket, new bulbs of the right type and rating, and repaired connections. A damaged fixture is replaced, sometimes with a model designed for insulation contact. Damaged wiring in the box is cut back or replaced. If the heat has affected framing or insulation, those may need attention too, which may involve other trades. Complicated jobs need an on-site visit for a firm quote, and quotes are given only by phone with the service call charge explained before dispatch.

Fans, bath heaters and other ceiling devices

The ceiling holds more than lights. Ceiling fans with light kits, bathroom exhaust fans with built-in heaters, and combination units all share ceiling boxes and wiring with fixtures. A fan with a light kit puts a motor and a lamp on one box, and the weight and vibration can work connections loose over the years. A bathroom heater lamp is built to run hot and can ignite dust or items placed too close.

If smoke or a burning smell comes from a ceiling fan, switch off the fan and light at the wall, then switch off the breaker. Do not keep the fan running to see whether the smell goes away. A fan motor that is failing can overheat its windings, and a wobbling fan can loosen the box. Remember that a fan box must be rated for the weight and motion of a fan, and an ordinary light box is not.

Bathroom exhaust fans collect lint and moisture. A seized motor can overheat quietly in a closed ceiling cavity for a long time before a smell appears. Tell the dispatcher exactly which device is involved so the right parts can be brought.

Apartments, condos and the ceiling above

In a multi-story building, a ceiling fixture may share its cavity with the unit above. A smoking fixture below can lead to heat and smoke in the floor assembly, and a leak from above can drip into your fixture. In a condo or apartment, you should tell the building manager or association promptly, since a problem in one unit can affect neighbors and common systems.

Fire separations in multi-family buildings are designed to slow the spread of fire, but a hot fixture can compromise them. If the building has a fire alarm and you see smoke, follow the building's evacuation plan and call 911. Do not attempt to handle a ceiling fire alone.

For repairs, find out who owns the wiring above the ceiling. In some buildings, the unit owner is responsible for the fixture and the circuit to it. In others, parts of the ceiling cavity belong to the association. Our page on condo association electrical emergencies covers how responsibility is usually divided.

After the repair: checking the ceiling

Once the fixture is repaired, ask the technician whether the ceiling space was examined for hidden damage. A fixture that smoked for even a short time can scorch the framing or insulation around it. Charred wood does not always show from below. A follow-up check a day or two later is sensible: look and smell for any hint of burning, feel the ceiling near the fixture for warmth, and check that the new bulbs are the right type.

Keep a note of what happened, with photos of the fixture, the damaged parts, and any marks on the ceiling. If you may need to explain the event to an insurer or a landlord, those records are useful. Our guide on photographing the damage before repairs explains what to capture before parts are thrown away.

Finally, check smoke alarms in the nearby rooms. A working alarm is the best backup for a hidden ceiling problem.

Example situations

A homeowner put 100-watt style halogen bulbs in a bedroom fixture rated for far less. After a few months the glass bowl began to smell, and one night a drip of hot plastic fell onto the bed. The socket was blackened and the wire insulation had hardened. The fixture was replaced and the bulbs changed to a suitable LED type.

In a house with a recently insulated attic, a recessed light in a hallway began to switch itself off and on. When the technician went up, loose-fill insulation was heaped around the can, and the paper facing was browned. The fixture was swapped for an insulation-rated model and the insulation was cleared back.

An older fluorescent kitchen fixture started to smell, then dripped a dark, sticky substance onto the counter. The ballast had failed. Because of the risk of hot, leaking material, the owner switched off the breaker, and the technician replaced the unit with a modern LED fixture.

Preventing it and what to do next

Check the label on every fixture and keep bulbs within the limit. Use bulbs that match the fixture type and whether it is enclosed. Replace flickering or discolored sockets. Do not let anyone pile insulation against a fixture that is not rated for it. Clean dust from fixtures when the power is off and the fixture is cool.

If a ceiling light in your home smokes, smells of burning, or drips, leave the area if there is any fire, switch off the circuit at the breaker if it is safe, keep people clear, and call. A dispatcher can explain the service call before anyone is sent.

Our guide on what to do if you smell burning sets out which calls to make in which order.

Questions people ask

Should I call 911 for a smoking light fixture?

Call 911 if there are flames, heavy smoke, scorched ceiling material, or if anyone is hurt. If there is only light smoke or a burning smell and you can switch off the breaker safely, do that and call an emergency electrician. If you are unsure, call 911 first.

Is it enough to switch off the wall switch?

No. A wall switch may not de-energize every conductor in the box, and a damaged fixture can stay live. Go to the panel and switch off the breaker for the room, from a dry position, then keep away from the fixture until a qualified technician has checked it.

Can I just change the bulb and see if it stops?

Not while the fixture is hot or smoking. A scorched socket and damaged wire will still be there with a new bulb. Switch off the circuit, leave the fixture to cool, and have it inspected. Afterwards, use only bulbs within the label's limit and suitable for the fixture type.

What if the drip is only water?

Water in a fixture is still dangerous because it can short the circuit and energize metal parts. Switch off the breaker, keep away from the area, and avoid standing under it. Find the source of the leak and have the fixture and circuit checked before using the light again.

Are LED bulbs always safe in any fixture?

LEDs run much cooler than halogen or incandescent bulbs, but electronics in the base still make heat. In fully enclosed fixtures, use bulbs rated for enclosed use and stay within the label's limit. A fixture that is smoking should still be inspected, whatever bulb is in it.

How do I find out the price?

Quotes are given only by phone, and the dispatcher explains the service call charge before sending anyone. Simple socket or fixture replacement can often be described by phone, while recessed lights, attic work or damaged wiring need an on-site visit so the true scope can be seen.

Talk to Emergency Electrician

About "Ceiling Light Is Smoking or Dripping Melted Parts": call and give us the details, and we will explain what is safe to do while you wait and what the visit would cover. Jobs that cannot be quoted blind need a look on site.

Related pages

  • Fan and Fixture: A ceiling fan that wobbles, smokes or trips a breaker, or a fixture box that runs hot, needs prompt attention. Learn what is safe to do and what to leave alone.
  • Burning Smell: A burning smell with no flames is still a warning. Learn how to choose between 911 and an urgent electrician call, and what to do while you wait.
  • Wet Attic Lights: A roof leak can send water along wiring into ceiling lights. Learn what is safe to do, what to leave alone, and how an electrician triages a wet ceiling.
  • Call Order: Electrical trouble, three possible calls. A plain decision order for when to dial 911, when to phone the power company, and when to call an electrician.
  • Panel Buzzing: Some panel hum is normal, but loud buzzing can signal arcing or a loose connection. Learn to sort the sounds and what to tell the dispatcher about them.
  • CO and Generator: A carbon monoxide alarm with a generator running is a life-safety emergency. Get out first and call 911. Learn why, and when an electrician call comes later.

Need to discuss an electrical concern or planned project?

Request service
Call (954) 481-0910