- AC Disconnect Burn: A melted or scorched AC disconnect box outside your home is an electrical hazard. See what to do now, who handles which part, and what to tell the dispatcher.
- AFCI Tripping: An arc-fault breaker that keeps tripping may be a nuisance trip or true arcing. Learn how to tell the difference and what a dispatcher will ask you about it.
- Bathroom Fan Smell: A burning smell from a bathroom exhaust fan or heat lamp can mean a failing motor or hot wiring above the ceiling. Learn the safe first steps.
- Failed Breaker: A breaker that did not trip when a circuit overheated or shorted: how technicians test breakers, what failure looks like and why some brands get extra scrutiny.
- Hot Panel: A hot breaker or panel cover can mean a loose connection or overload. Learn what warmth is normal, when to call 911, and what to do before an electrician.
- Breaker Re-Trips: A breaker that trips again right after you reset it points to a hard fault. Learn why repeated resetting is risky and what to do and tell the electrician.
- Appliance Trips Breaker: A breaker that trips every time the microwave, hair dryer or window unit runs is giving a clue. Learn overload versus fault and when to call an electrician.
- Burned Bus Bar: Scorch marks, melted plastic or a burned bus bar inside an electrical panel: what it means, why the panel is often replaced and what to do right now.
- Garage Burn Smell: A burning smell in the garage can come from a panel, subpanel, charger or outlet. Learn the safe order of steps, what to avoid and what to tell the dispatcher.
- Burning Smell: A burning smell with no flames is still a warning. Learn how to choose between 911 and an urgent electrician call, and what to do while you wait.
- Smoking Fixture: A ceiling light that smokes or drips melted parts is overheating. Learn what to do now, why wrong bulbs and insulation contact matter, and how it is repaired.
- Chewed Cord: If a child bit or chewed an electrical cord, get medical advice first, then isolate the circuit. A calm triage guide for parents and caregivers at home.
- CO and Generator: A carbon monoxide alarm with a generator running is a life-safety emergency. Get out first and call 911. Learn why, and when an electrician call comes later.
- Dock Power Faults: A dock GFCI that keeps tripping, a tingle in the water or a dead boat lift is an electrical emergency. Learn the triage order and what to tell the electrician.
- Doorbell Transformer: A hot doorbell, chime or thermostat transformer or a burning smell from low-voltage wiring can point to a bigger fault. Learn the triage steps before you call.
- Downed Wire: A wire on the ground may be live even if it is silent. Learn how to keep a safe distance, call 911 and the utility, and what never to do near a fallen line.
- Home: Sparks, smoke, shocks, downed lines or water near power? Start with 911 and the utility, then see how an urgent electrical call works in South Florida.
- Hot Cord: A hot extension cord or power strip is overloaded or damaged. Learn how to unplug it safely, why permanent cord use fails, and when to call an electrician.
- Backfeed Danger: Plugging a generator into a wall outlet can send power back onto the utility lines. Learn why backfeeding is dangerous and what proper isolation involves.
- Transfer Switch Fault: The generator is running but the house stays dark. Learn why a transfer switch may not move power, what is safe to check and what a technician will test.
- GFCI Won't Reset: A GFCI that will not reset means a fault or a failed device. Learn what safe checks you can do, what to avoid, and how to describe the problem by phone.
- Half-House Outage: Half your home lost power while the rest works. Learn why a split outage can mean a lost leg, what you can check safely, and why to call an electrician.
- Hot Switch: A hot, crackling or buzzing light switch signals a loose connection or overload. Learn the warning signs, what is safe to do, and how urgent each one is.
- Lights Dim With AC: A brief dip in the lights when the AC starts can be normal, but a deep dim, a buzz or a flicker is not. Learn how to tell the difference and when to call.
- Pulsing Lights: Lights pulsing or dimming all over the house can mean a loose service connection. Learn what to notice, what to do right away, and when to call urgently.
- Too-Bright Lights: Lights burning unusually bright can signal overvoltage from a lost neutral. Learn how to protect appliances, what to switch off, and who to call first.
- Loose Neutral: Lights that get brighter in one room and dimmer in another, buzzing and failing electronics can mean a loose neutral. Learn the signs and why it is urgent.
- Lost Leg: Lights work but the dryer, oven or air conditioner will not run? A lost leg may be the cause. See the symptoms, where the fault can sit and what to do next.
- Panel Buzzing: Some panel hum is normal, but loud buzzing can signal arcing or a loose connection. Learn to sort the sounds and what to tell the dispatcher about them.
- Seized Main: Main breaker burned, stuck or will not switch off or on: why it happens, why the utility may need to pull the meter and what to do in the meantime.
- Main Won't Stay On: A main breaker that trips and will not stay on usually signals a major fault, often after a storm. Learn what it means, what to avoid and what to prepare.
- Damaged Meter Base: A cracked, burned or loose meter base is a hazard at the front door of your electrical system. Learn what to do, how reconnection works and about permits.
- Meter Sparking: Sparks or arcing at the electric meter are an emergency. Learn why to call 911 and the utility first, who owns which part and what an electrician does after.
- Appliance Tingle: A tingle or mild shock from a metal appliance casing can point to a grounding fault. Learn the triage steps, who to call, and what a technician will test.
- One Room Dead: When one room loses power but the rest of the house is fine, the cause is usually local. Learn the safe checks, what a hidden connection means and when to call.
- Flooded Outlets: Outlets that were underwater or soaked should stay off until inspected. Learn what to leave alone, what a technician checks first, and how to describe it.
- Pet Chewed Wire: A dog, cat or rodent chewed a cord or wire. Learn how to check the pet, make the area safe without touching live metal, and what an electrician will inspect.
- Melted Plug: When a plug fuses into an outlet, do not pull it. Learn how to cut power at the breaker, what to report to the dispatcher, and how a technician clears it.
- Pool Equipment Trips: A pool pump, heater or light that keeps tripping the breaker can signal water intrusion or a bonding fault. Learn what to do, who to call and what to tell them.
- Generator Overload: A portable generator that trips, stalls or overheats when you add load: how to manage watts, what inlet boxes and cord sets can cause and when to call.
- Line on Tree: A power line resting on a tree, fence or roof can energize it. Learn the hazards, the correct call order, and what to avoid until the utility makes it safe.
- Bang Then Dark: A loud bang followed by a power outage can mean a transformer or service line failure. Learn how to stay safe, who to call, and what not to approach.
- Range/Dryer Outlet: A range or dryer outlet that sparks, smells hot or melts its plug is urgent. Learn why heat at the plug end matters, what to do first and what is checked.
- Frayed Service Cable: Frayed, sagging or rubbed-through service cable at your house: how to tell utility lines from your own conductors, what to avoid and who to call first.
- Bent Mast: A service mast bent or pulled by a tree, wind or a sagging line is a hazard. Learn what to do, how to work with the utility and what repair and permits involve.
- Faucet Shock: A shock from a faucet or pipe means plumbing or metal fixtures may be energized. Learn why to stop using them, the order of calls, and what happens next.
- Small Fire: Small flames at an outlet, cord or appliance still mean get out and call 911. Learn why water is wrong, when an extinguisher is an option and what follows.
- Alarms, No Fire: Smoke alarms sounding with no visible fire can have electrical causes. Learn how to sort a 911 situation from a wiring problem and what to do next.
- Panel Smoke: Smoke from a breaker panel is a 911 event. Learn what to do while waiting, what the fire crew does, and how the electrician visit follows afterward.
- Solar and Battery Faults: An inverter error light, a hot enclosure or a burning smell from a home battery needs careful triage. Learn what is safe when two power sources feed the house.
- Shock Victim: If someone was shocked at home, call 911 first and do not touch them while still energized. Learn the safe order of steps and the electrical check afterward.
- Outlet Sparks: Sparks from a wall outlet are an electrical emergency. Learn the safe order of steps, when to call 911, and what to tell the electrician on the phone.
- Standby No-Start: The power went out and your standby generator stayed silent. See what an electrician checks, what a generator technician checks and what you can do safely.
- Subpanel Dead: A garage, shed or workshop lost power while the main house is fine. Learn what a feeder fault means, what is safe to check, and what to tell the electrician.
- Warm Wall: A warm spot on drywall near an outlet, switch or panel can signal hidden overheating. Learn what else causes it, why it matters and the order to call.
- Warm Outlet: A warm, browned or melted outlet is a heat warning. Learn how to read the damage, what to unplug, when it is a same-day call, and what a technician checks.
- Water in Panel: Water reaching an electrical panel is serious. Learn when to shut the main, when to stay out, what causes intrusion, and what an electrician checks first.
- Water in Outlet: Water dripping from a ceiling light, fan or outlet is both a leak and an electrical hazard. Learn how to separate the water from the circuit and stay safe.
- Torn Weatherhead: A torn or leaking weatherhead lets rain run down the conduit toward the meter and panel. Learn the danger, the order of coordination and what repair involves.
- Only You Dark: Your house has no power but the neighbors do. Learn how to tell a utility fault from a problem on your side of the meter and who to call first.
- Surge Device Failed: A whole-house surge device with a red light, alarm or burn marks has done its job or failed. Learn what the indicator means and what to do after a big surge.
Reading about "Emergencies"? Tell us what stopped working and when. We will say what an electrician would check first, and quotes are given by phone when the job can be described.
The difference between an emergency and an urgent repair
Not every electrical problem needs the same level of urgency, and sorting them correctly helps you act calmly. A true emergency involves immediate danger: smoke, fire, a burning smell that does not fade, sparking, a downed wire, water reaching live equipment or someone being shocked. In those cases, get everyone out, call emergency services and stay away from the equipment. Do not stop to gather belongings or to investigate, because the situation can change quickly and the first priority is that every person and pet is safely outside.
An urgent repair is serious but stable. A dead circuit, a breaker that keeps tripping, half the house without power or an outlet that feels warm all deserve prompt attention, yet there is time to make a plan. Turning off the affected circuit when it is safe to reach and leaving it alone is usually the right immediate step. The order of the steps matters, because skipping ahead can hide the very clue that explains the whole problem. Resist the urge to keep testing it by switching it back on, since each attempt can add heat to a connection that is already failing.
Some problems are closer to warnings: lights that flicker occasionally, a buzzing fixture or a panel that has been getting noisier. These are worth a call before they become a failure, because they often cost less to understand early than after something burns out. If you are unsure which category you are in, treat it as the more serious one and call us to confirm availability. Even when the cause turns out to be simple, confirming it with proper testing is better than assuming and moving on. We will talk through what you describe and help you decide what to do in the meantime.
What to have within reach before trouble starts
A small preparation kit makes any electrical emergency easier to handle. Keep a working flashlight and spare batteries where you can find them in the dark, a charged phone or battery pack, and a list of important numbers on paper. Know where your main breaker is and make sure the path to it is clear of storage and clutter. Make a note of anything that changed recently, whether a new appliance, a renovation or a stretch of heavy weather. In a South Florida home, where storms and outages are common, these items tend to get used more than once a season.
It also helps to label your panel honestly. Spend an hour with a helper, switching one breaker at a time and writing down what it controls. A clear label saves time when you need to cut power to a single area. Take photographs of the panel and meter and store them on your phone so a technician can see them ahead of a visit. A short list of questions prepared in advance keeps the conversation focused and makes sure nothing important is forgotten. If the labels are faded or contradictory, note that, because it tells us something about the history of the wiring.
Finally, teach everyone in the household the basics: do not touch downed wires, do not use water on an electrical fire, and do not enter a flooded room with live power. Write these rules where they can be seen, perhaps on the inside of a utility closet door. Preparation does not remove the emergency, but it keeps decisions simple when stress makes thinking hard. Call us to confirm availability when you need help, and we will start by asking what you can see and what you have already done.
Choosing the right page for your situation
The pages in this section are organized around what you see, hear or smell rather than around technical terms. If your lights are dimming, flickering or going out on one side of the house, there is a guide for each. If something is hot, sparking or smells like burning, those guides emphasize shutting down and staying clear before any troubleshooting. Heat, humidity and heavy air-conditioning use are part of daily life here, and they put steady strain on electrical equipment. Pick the one closest to your experience, and read the safety steps first even if you think you already know them.
Each guide follows the same rhythm. It explains what the symptom usually means, what you can safely do right now, what to avoid, what a technician will check, and what to have ready for the visit. The goal is not to turn you into an electrician but to help you describe the problem accurately and stay safe while you wait. Because every property is different, the plan is shaped around what is actually found rather than a fixed routine. Accurate descriptions make the visit shorter and the explanation afterward clearer, which benefits you in every way.
If your situation does not match any page, call us to confirm availability and describe it in your own words. Explaining what you noticed, when it started and what was running at the time is often enough to tell whether it can wait or needs prompt attention. The scope and any quote are explained before work begins, so you always know what you are agreeing to. Expect the explanation to cover what was found, what it means, and which choices are urgent and which can wait. If you are worried about safety at any point, step outside and call emergency services first.
