Electrical help for homes and businessesRequest service
Emergency ElectricianCall (954) 481-0910
Emergency Electrician technician installing a pendant light in a bright coastal home

Service Areas

Emergency Electrician in Davie, Florida

Davie has a rural-style character that is unusual in South Florida: larger lots, horse properties, barns, workshops, wells and detached buildings reached by long wire runs. Those features create their own electrical emergencies, from failed subpanels to voltage loss at the far end of a run. This page explains the patterns and the right order of calls.

Triage first: who to call in Davie

In any life-threatening electrical situation, call 911 first. That means visible fire, heavy smoke, a person shocked and hurt, anyone unresponsive or anyone with chest pain, confusion or trouble breathing after contact with electricity. On a large property, give the dispatcher the street address, say how to reach the house or the building involved and send someone to the road to guide responders in. Distance and gates can cost time at the wrong moment.

If a utility line is down, sagging or sparking, stay far back and keep people and animals away. Call 911 and the power company. Do not touch a fence, a gate, a metal roof, a water trough or a vehicle that may be touching the line. On a rural-style property, a downed line can energize a long run of fencing without any visible sign.

If nobody is in danger but something is wrong, such as a hot or buzzing panel, a burning smell, a breaker that will not reset or a detached building that has lost power, call an emergency electrician. The dispatcher will ask safety questions, explain how the visit works and tell you what to leave alone while you wait.

Emergency Electrician dispatch crew meeting beside a branded van in South Florida
  • Fire, heavy smoke, injury or unresponsive person: 911 first, then guide responders in.
  • Downed line or line touching a fence or tree: stay back, keep animals away, 911 and the power company.
  • Smoke, heat or buzzing from a panel or subpanel: stay clear, 911 if there is smoke, then an emergency electrician.
  • Barn or workshop dark, breaker tripping or well pump dead: call an emergency electrician.

Barns, stables and workshops: electricity in dusty, damp places

A barn is one of the harder places to keep electrical equipment safe. Hay and bedding dust is combustible, and dust settles on every surface, including fixtures, outlets and wiring. Moisture from animals, washing and humid weather corrodes connections. Rodents chew insulation. Animals themselves can chew a cord, kick a fixture or knock over a heater. Add a space heater, a fan, a clipper or a water heater, and the risk climbs.

Signs of trouble in a barn include lights that flicker, outlets that feel warm, breakers that trip when it rains, a tingle when touching a metal stall, trough or fence, and animals that shy from a particular spot or refuse to drink from a trough. Stray voltage can make animals uneasy before any human feels it. If an animal behaves oddly near a metal object or a water source, treat it as a possible electrical issue.

If you smell burning in a barn, or see smoke, get animals and people out if it is safe to do so and call 911. Do not use water on an electrical fire. If a breaker has tripped in a barn, do not keep resetting it. Our pages on protecting pets from electrical hazards and pet-chewed wiring explain what chewing can do, and the same logic applies to livestock and rodents.

Long service runs to detached buildings

On a large lot, the main house may sit far from the barn, the guest cottage, the shop or the pool equipment. Power reaches those buildings through feeders, which may run overhead or underground for a considerable distance. A long feeder faces a problem that a short one does not: voltage drops along the length of the wire. If the wire is undersized for its length, equipment at the far end may run poorly or overheat.

Signs of voltage drop include lights that are dim, motors that struggle to start, pumps that run hot and trip, and appliances that behave oddly only at the far building. Signs of a damaged feeder include a breaker that trips when it rains, a circuit that goes dead after digging and ground fault devices that trip with nothing running. Buried cable may have been damaged by roots, equipment, rodents or an earlier excavation.

Detached buildings also need a proper disconnect and grounding. A subpanel that is fed incorrectly, a ground and neutral that are bonded where they should not be or a missing grounding electrode can create shock hazards. Our pages on subpanel failure in a detached building and urgent ground fault tracing explain how technicians approach these faults.

Davie property featureCommon electrical problemFirst move
Barn or stableDust, moisture, chewed wiring, warm outletsBreaker off if safe, animals out, call
Detached workshopSubpanel fault, voltage dropLeave breaker off, call
Well pumpTrips, will not start, burnt smellSwitch off pump breaker, call
Long fence or gate operatorStray voltage, damaged control wiringKeep animals clear, call
Pool and outbuildingGround fault, water in boxEveryone out of the water, 911 if shocked

Well pumps, irrigation and water systems

Many rural-style properties depend on wells, pressure tanks and irrigation systems, and each uses electricity in a harsh environment. A well pump may sit in a damp pit, a shed or underground. Its power cable runs through conduit and may have been in service for many years. Irrigation controllers, valves and pumps sit outdoors in wet soil and get hit by lawn equipment, sprinklers and storms.

A pump that will not start, that trips its breaker, that runs and then stops or that gives off a burning smell has an electrical problem or a mechanical problem that has become an electrical one. Switch off the breaker for that pump, keep away from wet equipment and call. If the pump house is flooded, do not enter. If you feel a tingle from a faucet, a pipe or a tank, that is an emergency. Our page on shock from a faucet or pipe explains why it happens.

Water systems also tie to the electrical bonding of the property. A pipe that carries a stray current can be a hazard to anyone who touches it. If the shock is mild, it is still a sign that something is wrong. Do not wait for it to get worse. Stop using the equipment and call.

Fences, gates and stray voltage

Large lots tend to have long fences and electric gates. Gate operators run on power and low-voltage controls, usually fed by a cable from the house. Those cables are exposed to weather, mowers and shovels. When insulation fails, current can leak into the gate frame, the fence or the ground nearby.

Stray voltage is a term for low-level electrical energy that appears on objects that should not be energized. People may feel it as a mild tingle or not at all. Animals, particularly horses and cattle, are more sensitive and may refuse to cross a spot, drink or eat. A horse that stops dead at a gate or paws away from a trough has told you something.

If you suspect stray voltage, keep animals away from the area and stop using the equipment. Do not test it by touching it yourself. Call an electrician and describe what the animals did. Our page on a tingle from an appliance explains the general principle, which applies equally to fences and troughs: a tingle means current is where it should not be, and it will not fix itself.

Overhead lines, trees and storm damage on large lots

Overhead lines on larger properties often cross a lot of ground, passing through trees, over drives and beside outbuildings. Storms bring limbs onto those lines, and tall equipment such as hay loaders, dump trucks and boom lifts may touch them. A branch on a line, a pole leaning after a storm or a line hanging low across a drive is a hazard to everyone on the property.

Never try to move a branch off a line, and never raise a tall load near one. Keep vehicles clear. If a line is down across a drive, do not drive over it. Call 911 and the utility. Our pages on a downed wire in the yard and a tree falling on the service line explain the dangers.

After storms, look at the equipment from a distance. Is the mast straight? Is the meter intact? Are outbuilding feeders still attached? Is the water pump running normally? Do not walk through standing water to inspect electrical equipment. Our page on storm-damaged meter and mast explains what to look for.

Generators, standby power and rural reliability

On a property with a well, animals, a cooler full of feed supplements or a person on medical equipment, an outage matters more than it does in town, and many owners keep a generator. A generator is a source of risk if it is not used correctly. Never run one indoors, in a barn or near a window or vent, because carbon monoxide kills. Never connect one to a house outlet or a panel without a transfer switch or an inlet and interlock, because it can backfeed the utility line and kill a lineworker.

A standby generator wired into the property can be a good solution, but it has to be installed correctly, tested and maintained. A system that does not start when power fails, or that transfers badly, is a common cause of urgent calls. Our pages on generator backfeed risk, standby generator fails to start and generator inlet and transfer switch basics explain the issues.

Think through which loads you need during an outage, such as the well pump, refrigeration, a few lights and medical equipment, and plan around those. A technician can help match a generator or an inlet to the loads that matter.

Pools, lighting and outbuildings

Larger lots often include pools, pool houses, patios, lighting along a drive and outdoor kitchens. All of them rely on outdoor wiring, and outdoor wiring ages in the sun, rain and soil. A pool light that flickers, a pump that trips its breaker or an outlet near the water that no longer resets is a warning.

If anyone feels a tingle or shock in the water, get everyone out immediately and do not enter to help. Call 911 if anyone is hurt. Switch off the pool breaker only if you can reach it dry. Then call an emergency electrician and keep the pool closed until the cause is found. Our page on pool equipment tripping power explains common causes.

Landscape and drive lighting add a quieter set of risks. Low-voltage systems are generally safer, but the transformer that feeds them runs on household voltage. A transformer that is wet, cracked or burned is a hazard. Our page on landscape lighting short explains what to do.

Who fixes what, permits and records

The power company is responsible for its lines and equipment up to the connection to your building, which generally includes the meter. The owner is responsible for everything on the building side, including feeders to detached buildings, subpanels, well and irrigation wiring and fences and gates that are powered. If the neighborhood is out, it is a utility matter. If only your property is out, check the breakers and the meter. Our page on utility or electrician, who fixes what explains more.

Some work requires a permit and an inspection through the building department, including new feeders, subpanels, service changes and generator connections. A technician should explain what applies. The utility may wait for an inspection before reconnecting service after a major repair.

Keep records. Photograph the damage before repairs. Keep the findings report, the permit and the inspection result. List damaged equipment for any insurance claim. If the property is used for animals or business, keep notes about lost use. Our guide on photographing damage before repairs explains what to capture.

Rodents, insects and the slow damage to rural wiring

Properties with feed, hay, tall grass and outbuildings attract rodents, and rodents chew. Mice and rats strip insulation from cable in attics, walls, barns and conduit that is not sealed. Squirrels and raccoons do the same outdoors. Insects, too, build in junction boxes, disconnects and gate operators, and ants are known to pack into electrical equipment. Wasps nest in light fixtures and meter bases.

Chewed wiring may not fail at once. Bare conductors can sit side by side until moisture or movement closes the gap, producing a short or an arc. Signs include a burning smell without a visible source, tripping breakers on a dry day, gnawed material near a panel or a fixture and scratching in a wall near a circuit that misbehaves.

Do not poke around a box where insects or rodents have nested. Switch off the circuit if it is safe and call. A technician will repair the damage and look for the entry point, and the property owner will usually need pest control to prevent a repeat. Our page on preventing a repeat electrical emergency explains why fixing the cause matters as much as the repair.

What to tell the dispatcher and how to prepare

Give the dispatcher the address and explain how to find the building involved. Mention gates, long drives and any dogs or livestock. Say what happened, what you saw, heard and smelled and what you did. Mention whether the area is wet, whether a breaker is tripped and whether anyone or any animal has felt a shock. Say whether the call follows a storm.

You will be asked safety questions and told how the visit works, including the service call charge, which is explained on the phone before anyone is dispatched. Quotes are given by phone, and more complicated jobs need an on-site visit first. Our page on what to tell the electrician dispatcher offers a short script.

To prepare, learn where every panel and subpanel is, label them and write down what each one feeds. Keep a plan for water and animals during an outage. Check barn wiring for dust, damage and chewing. Do not ignore small signs. A flicker, a warm outlet or a restless horse near a trough is an early warning. If something looks, smells or feels wrong, call.

Questions people ask

Who do I call first for an electrical emergency in Davie?

For fire, heavy smoke, a person shocked and hurt or anyone unresponsive, call 911 first and send someone to guide responders in. For a downed or sparking utility line, stay back and call 911 and the power company. For trouble at your property without immediate danger, call an emergency electrician.

My horse will not walk past a gate or drink from a trough. Could it be electrical?

It could be stray voltage. Animals are more sensitive than people and may react before anyone feels anything. Keep animals away, do not test it by touch and call an emergency electrician. Describe what the animal did and where, so the technician knows where to start looking.

Why does my barn or workshop have dim lights or struggling motors?

A long feeder can lose voltage along its length, particularly if the wire is undersized for the distance or a connection has loosened. A damaged buried cable or a faulty subpanel can also be the cause. Stop running heavy equipment there and call so a technician can test the feeder.

My well pump keeps tripping its breaker. What should I do?

Switch off the pump breaker and leave it off. Do not enter a flooded pump house and do not touch wet equipment. Tripping can come from a failing motor, damaged cable, water in a connection or a ground fault. Call an emergency electrician and describe any smell or tingle.

Can I power my property with a portable generator during an outage?

Only outdoors, far from windows, doors, vents and barns, and never connected to a house outlet or panel without a proper transfer switch or inlet and interlock. Indoor use can cause fatal carbon monoxide poisoning, and backfeeding can kill utility workers. A technician can explain safe connection options.

How are quotes given for emergency electrical work?

Quotes are given by phone after you describe the problem, and more involved jobs need an on-site visit first. There is a service call charge, explained on the phone before dispatch. The technician explains findings and options in plain terms before any work begins, so you decide at each step.

Talk to Emergency Electrician

About "Emergency Electrical Help in Davie": call and give us the details, and we will explain what is safe to do while you wait and what the visit would cover. Jobs that cannot be quoted blind need a look on site.

Related pages

  • Subpanel Dead: A garage, shed or workshop lost power while the main house is fine. Learn what a feeder fault means, what is safe to check, and what to tell the electrician.
  • Faucet Shock: A shock from a faucet or pipe means plumbing or metal fixtures may be energized. Learn why to stop using them, the order of calls, and what happens next.
  • Backfeed Danger: Plugging a generator into a wall outlet can send power back onto the utility lines. Learn why backfeeding is dangerous and what proper isolation involves.
  • Plantation: Emergency electrical triage for Plantation: established ranch homes, aging panels and decades of added room loads. Learn who to call first and what to expect.
  • Weston: Emergency electrical triage for Weston: larger homes, heavy loads, pool equipment and whole-house systems. Learn who to call first and what to expect.
  • Deerfield Beach: Emergency electrical triage for Deerfield Beach: coastal air, retirement-era condos and older single-family homes. Learn who to call first and what to watch.

Need to discuss an electrical concern or planned project?

Request service

Related pages

Call (954) 481-0910