If a pet has just been shocked: first steps
If you see or suspect that a pet has bitten a live cord, touched a wire or received a shock, your own safety comes first. Do not touch the animal while it may still be in contact with the source, because current can pass through the animal to you. If the animal is still connected, the safest way to end contact is to cut power at the main breaker, but only if the panel is dry and normal and you can reach it quickly without standing in water. If that is not possible, call for help and keep clear.
Once the animal is away from the source, call an emergency veterinarian right away, even if the pet seems to recover. Electrical injuries in animals can include burns in and around the mouth, and fluid can build up in the lungs hours later, which makes the pet breathe with difficulty. A pet that coughs, breathes heavily, drools, refuses to eat or acts disoriented after contact needs a veterinary check promptly. Do not wait to see whether symptoms develop.
Leave the cord, device and outlet as they are, unplugged and out of reach, and keep other pets and children away. Photograph the damage from a distance and call an electrician to examine the circuit before it is used again. The page on a pet that chewed wiring explains what the technician will look at, and the guide on what never to do in an electrical emergency covers mistakes to avoid.

Why pets chew cords and wires
Chewing is natural behavior. Puppies and kittens chew when they are teething and to explore. Adult animals chew from boredom, anxiety, lack of exercise or because they like the texture of insulation. Rabbits and rodents have continuously growing teeth and use cords as wear surfaces. Birds that are allowed out of cages will bite at anything that moves or looks interesting.
From the pet's point of view, a dangling cord is a moving target, and a cord behind a sofa is a quiet, hidden object that can be chewed in peace. Pets do not understand that the cord is carrying power. They also do not feel safe or unsafe in the way people do; the first sign of danger is often the shock itself.
That behavior matters for your wiring as well. A cord with chewed insulation can expose conductors that arc, overheat and start a fire. Chewed wiring in an attic, wall or crawlspace, usually from rodents, is a separate hazard and a common cause of mysterious breaker trips and burning smells. The guide on how electrical fires start explains how damaged insulation leads to heat.
Pet-proofing cords and power strips
The most effective step is keeping the pet from reaching cords at all. Move furniture so that cords run along walls and behind heavy pieces rather than across open floor. Use cord covers or channels, which are rigid, and cord management boxes that enclose power strips. Make sure whichever product you use is rated for the load and does not trap heat around the strip.
Keep chargers and small device cords unplugged and out of reach when they are not in use. Many pets chew charging cables because they are thin and flexible. Do not leave a phone cable plugged into the wall with the end dangling on the floor.
Training and deterrents can help, but they are not substitutes for physical separation. Taste deterrents made for pets are sold in stores, and some animals ignore them. Do not use home mixtures that contain irritants or substances that could harm the animal. Provide plenty of safe chew toys, exercise and attention, since an animal with something better to chew is less likely to go for cords. The page on extension cord and power strip limits adds guidance on what not to rely on.
Outlets, lamps and low-level devices
Pets seldom poke things into outlets the way toddlers do, but they do chew plugs and tug on cords connected to outlets. A plug that is pulled partly out can leave live prongs exposed and sparking. Make sure plugs seat fully and that outlets grip plugs firmly. A loose outlet that lets plugs fall out or wiggle is a repair item, not a quirk.
Lamps, fans and floor-level devices with cords at pet height deserve a second look. A lamp cord with a visible bite mark, a fan with a cracked cord, or a night light with a cracked plug should be replaced. Do not patch a damaged cord with tape and keep using it.
Fish tanks, reptile enclosures, bird cages and similar setups often have heaters, pumps, lights and timers, usually with several cords plugged into one strip. These setups combine water or heat with electricity, which makes them higher risk. Use drip loops so water cannot run along a cord to an outlet, protect outlets with ground-fault devices, and keep the strip off the floor. The page on what GFCI and AFCI protect against explains why that protection matters near water.
Water bowls, wet floors and outdoor risks
Pets drink from anything, wade through puddles and sleep where it is cool. In South Florida, that often means the tiled floor of a laundry room or garage, or damp ground near the house. If a floor is wet and there is an appliance with a damaged cord or a leaking washing machine, the pet is the first to meet the problem.
After a storm or flood, keep pets away from any standing water inside or outside the house until you know it is safe. Water that has contacted outlets, appliances, extension cords or buried wiring can be energized. Do not let pets walk through floodwater near a panel, a pool pump or a garage outlet. The page on first electrical steps in a flooded home explains how to stay safe, and the page on flooded outlets after water intrusion covers what a technician will check.
Outdoors, keep pets away from landscape lighting transformers, pool equipment, outdoor outlets with open covers, and any fallen wire. Dogs that investigate a downed line can be seriously hurt. If you see a wire on the ground, keep animals and people back and call 911 and the utility. The page on a downed wire in the yard explains what to do.
Warning signs that a pet has been shocked
Signs vary by animal and by the amount of current. Some are obvious. Others are subtle. Look for yelping or crying followed by hiding, sudden collapse, muscle twitching or tremors, difficulty standing, or loss of consciousness. Burns may appear as redness, blistering, blackened or whitish areas on the lips, tongue, gums, or the roof of the mouth, sometimes with a smell of burning.
Hours later, the pet may cough, breathe quickly or heavily, show blue or pale gums, drool, refuse food or water, vomit, or act lethargic. These can signal fluid in the lungs or heart rhythm problems and need urgent veterinary attention.
Also watch for signs in the home. A cord with bite marks, melted plastic at the end of a cord, black scorch marks on a plug or outlet, a smell of hot plastic, or a breaker that tripped at the time your pet was nearby all suggest that the animal touched something live. The guide on reading a tripped breaker can help you describe what happened to a technician.
Rodents, squirrels and wildlife in the wiring
Pets are not the only animals that chew. Rats, mice and squirrels can strip insulation in attics, soffits, garages and wall cavities, and they often do it near warm equipment. Signs include scratching or scurrying sounds, droppings near equipment, gnawed cable jackets, a smell of urine, and flickering lights or dead outlets with no obvious cause.
Chewed insulation in a wall or attic is not something you can safely check yourself. If you suspect it, avoid opening junction boxes or pulling on cables, and have a qualified electrician look at the circuits that are misbehaving. They can test for shorts and repair or replace damaged runs. The page on urgent attic wiring repair explains what that involves.
Wildlife control is a separate trade. An electrician repairs the damage, and removing the animals or sealing entry points is typically handled by a wildlife professional. Fixing the wiring without stopping the source means the damage returns.
Small animals, birds and exotic pets
Each kind of animal has its own risk. Rabbits, guinea pigs, hamsters and ferrets are chewers and should not be allowed to roam loose in rooms with exposed cords. If they run around the house, use a pen or a pet-proofed room with all cords covered or removed.
Birds are especially sensitive to fumes. Overheated plastic and coatings, such as those on certain non-stick cookware and some heating appliances, can release fumes that harm birds long before people notice. A burning smell from an appliance or outlet is a reason to move the bird to fresh air immediately and call for help, using the guidance in the call order when you smell burning.
Reptile owners rely on heat lamps, mats and thermostats, often running continuously. Use thermostats and cords rated for the device, keep heat lamp fixtures secured, and make sure the circuit is not shared with other high-draw devices. If a breaker trips repeatedly on a circuit with a reptile enclosure, do not keep resetting it; the animal's heat source may be failing, and an electrician should examine the circuit.
A pet-proofing checklist for the whole home
Pet-proofing is easier when it is organized by room and by the way your own animal behaves. A puppy that chews everything needs a different layout than a cat that climbs. Walk through the house and note what applies.
Use this list as a starting point and add items that fit your animals:
- Get down to pet height and look at every cord you can see. Anything within reach that is frayed, bitten or cracked is removed from use.
- Route cords behind furniture or into covers, and shorten slack by using clips along baseboards, not staples driven through the cord.
- Unplug devices you are not using, especially chargers, small lamps, and kitchen appliances that sit near the floor.
- Check outlets behind furniture where pets sleep or hide, and look for plugs that sit loose or feel warm.
- Place power strips in enclosed boxes or mount them off the floor, and never plug one strip into another.
- Secure aquarium, terrarium and bird cage equipment, add drip loops, and keep the strip dry and elevated.
- In the garage and laundry area, make sure cords for freezers, washers and dryers are not on the floor where pets sleep.
- Outdoors, inspect outlet covers, landscape lighting wires and pool equipment, and keep animals away from any damaged item.
- Write your veterinarian's emergency number and the nearest emergency animal hospital on the household plan page.
Kittens, puppies and the first year
The highest-risk period is the first year of a pet's life, when teething and curiosity combine. A new puppy or kitten should be introduced to the home one area at a time, with those spaces pet-proofed in advance. Set up a pen or a gated room with no cords, a bed, water and toys, and expand the space only as the animal proves it can be trusted.
Supervise closely and redirect chewing at once. When you catch a puppy at a cord, calmly take the cord away and offer a chew toy, and praise the switch. Consistency over several weeks matters more than any product. When you cannot supervise, confine the animal to the safe space, since a few unobserved minutes are enough for a serious injury.
Older pets can start chewing too, often after a change such as a move, a new baby or a stressful event. If chewing starts suddenly in an adult animal, mention it to the veterinarian, and tighten your pet-proofing while you find the cause. This is also a good time to look at the electrical system, since a hum or a buzz from a device can attract an animal's attention. The page on buzzing from a panel explains why a sound like that should be taken seriously.
Plan for pets in an electrical emergency
Add pets to your household plan. Keep leashes, carriers and a spare set of keys by the door, and decide who is responsible for which animal. If there is smoke, flames or a strong burning smell, everyone gets out, and nobody goes back inside for a pet. Tell firefighters where the animal usually hides, and they can search.
Keep a card with your vet's emergency number and the nearest emergency animal hospital. In a blackout, remember that heat is a hazard for animals. Do not leave pets in a closed car or a hot room, and keep water available. If you rely on powered equipment for an animal, such as an aquarium heater or aerator, know how long it can be off and have a battery option.
The household plan for electrical trouble includes meeting points and roles that can be extended to cover pets. In a storm, consider where pets will go if you have to leave the house, since many shelters have specific rules.
When to bring in an electrician after a pet incident
After any incident in which a pet bit a cord or was shocked, the circuit should be examined before it is used again. A bitten cord can leave the plug, the outlet and the wiring behind it damaged. A technician will check the outlet for heat marks and loose connections, test the circuit for faults, and look at any ground-fault protection that tripped. If a ground-fault outlet or breaker tripped and will not reset, that is a sign of a continuing fault, and the page on a GFCI that will not reset explains what that can mean.
Call as well if you hear scratching in walls or attics together with electrical symptoms, if you see chewed insulation on any visible wiring, or if you smell burning near a pet area. Quotes are given by phone, and a complicated job needs an on-site visit, with a service call charge explained before dispatch.
When you call, mention the type of animal, what it chewed or touched, whether the veterinarian has been contacted, and whether the breaker tripped. Keep the damaged item for the technician to see. If you are unsure whether something is an emergency, call and describe what you noticed, and the dispatcher can guide you.
Questions people ask
My dog bit a cord and seems fine. Should I still see a vet?
Yes. Burns in the mouth and fluid in the lungs can show up hours after the contact, and some animals hide discomfort. Call an emergency veterinarian, describe what happened, and follow their advice. Keep the cord unplugged and do not use that outlet until it has been checked.
Do bitter sprays stop pets from chewing cords?
Sometimes, but not reliably. Some animals ignore the taste. Treat sprays as a backup to physical protection, such as cord covers, routing cords behind furniture, and unplugging devices when not in use. Do not use homemade mixtures that could irritate or poison the animal.
Is it safe to pull a cord out of my pet's mouth?
Not until the power is off. If the cord is plugged in, current may still flow through the animal and into you. Switch off the main breaker if the panel is dry and normal, or unplug only if the plug is dry and undamaged and you can do it without touching the animal. If unsure, call for help.
Could mice or squirrels in my attic cause electrical problems?
Yes. They can strip insulation from wiring, which can cause shorts, tripped breakers, dead outlets or burning smells. Do not open junction boxes or pull on cables yourself. A qualified electrician can test the circuits and repair damage, while a wildlife professional handles removing the animals and sealing entry points.
What should I tell the electrician after a pet incident?
Say what kind of animal it was, what it chewed or touched, whether the veterinarian has been contacted, which outlet or cord was involved, and whether a breaker or ground-fault device tripped. Keep the damaged cord for the technician. Quotes are given by phone, and larger jobs need an on-site visit.
Reading about "Protecting Pets From Electrical Hazards"? Tell us what stopped working and when. We will say what an electrician would check first, and quotes are given by phone when the job can be described.
Related pages
- Pet Chewed Wire: A dog, cat or rodent chewed a cord or wire. Learn how to check the pet, make the area safe without touching live metal, and what an electrician will inspect.
- How Electrical Fires Start: A plain explanation of how arcing, overheated connections and overloaded wiring can start a fire inside walls and panels, and what to do when you suspect one.
- Household Plan: Build a simple family plan for electrical trouble: who calls 911, who handles the panel, where to meet outside, and what to tell the dispatcher.
- Call Order: Electrical trouble, three possible calls. A plain decision order for when to dial 911, when to phone the power company, and when to call an electrician.
- Emergency Check: A branching guide from symptoms to urgency, showing when to call 911, when to call the utility, when to call an electrician now, and when a visit can wait.
- Mobile Home Electrical: Electrical emergencies in mobile and manufactured homes involve park pedestals, feeder cables and under-home wiring. Learn triage steps and who is responsible.
