The order in one glance
The order is simple to say and harder to follow when you are frightened, so it helps to read it before you need it. First, if there is any danger to life or any fire, call 911. Second, if the problem is outside your property on the utility's equipment, or if a wire is down, call the power company, in addition to 911 when a wire is down. Third, if the problem is inside your property and nobody is in danger, call an electrician.
These are not competing choices. Sometimes you need more than one call, and the sequence is what matters. A dispatcher at 911 can send fire and medical help. The utility can cut power to its own lines and send crews to its equipment. An electrician can diagnose and repair the wiring on your side of the meter. Each has a different job, and none of them can do the others' jobs.
If you are unsure which category you are in, call 911 and let the dispatcher decide. Nobody will be upset that you called about smoke that turned out to be dust. Waiting to be sure is what causes harm. After the immediate danger is handled, you can sort out the rest, calmly, step by step.

- Danger to life, fire, smoke, someone shocked: call 911.
- Wire down, damaged utility equipment, whole area dark: call the power company, and 911 if a wire is down.
- Problem inside your property with nobody in danger: call an electrician.
- Unsure which: call 911 and describe what you see.
Triggers for calling 911
Call 911 first whenever there is a threat to people or a fire. Specific triggers include flames at any size, smoke coming from an outlet, panel, appliance, wall or meter, a burning smell with no known source that persists, sparks that continue or that have ignited something, a person who has been shocked and is hurt, confused, in pain, or unresponsive, and a downed wire on or near people, cars or buildings.
Also call 911 if a carbon monoxide alarm sounds while a generator is running, or if anyone feels dizzy, nauseated or has a headache around a running generator. Move everyone outside to fresh air first, if you can do so safely. If someone has been shocked and has any symptoms, even if they seem to recover, medical evaluation is advised because electrical injury can affect the heart and other organs in ways that are not obvious at first.
While you wait for responders, do the safe things only. Move people away from the hazard. Keep children and pets back. If you can reach the main breaker without touching anything wet and without going near the damaged area, you may switch it off, but only if it is clearly safe and does not put you in danger. Do not touch a person who is still in contact with a live source. Do not use water on an electrical fire. Do not go back inside for belongings.
- Any flames, any smoke from an electrical source.
- A person shocked, hurt, unresponsive, or unwell afterward.
- A wire down near people, vehicles, buildings or water.
- A carbon monoxide alarm or symptoms near a generator.
- When in doubt about danger, call.
Triggers for calling the power company
The utility is responsible for the lines and equipment up to a certain point, usually the connection to your building and the meter. Call the power company when the problem is on their side. Clear signs include a wire on the ground, a pole that is leaning or burning, a transformer that is humming, smoking or has blown, and a power outage that affects many properties around you.
In those cases, the utility can cut power to the damaged section and send crews. If a wire is down, call 911 as well, because the area must be kept clear. Do not approach it. Wires on the ground can be live, and the ground around them can be energized for some distance. A downed line touching a fence, a puddle or a vehicle can energize those things. Stay far away and keep others away.
The utility also handles meter issues that are on their equipment, and many have a process for disconnecting and reconnecting service. If a meter is damaged, sparking or pulled out of its base, call 911 if there is fire or sparking, then the utility. Do not touch the meter. For more on how the process works see the power company disconnect and reconnect process and who fixes what, the utility or an electrician.
Triggers for calling an electrician
Call an electrician when the problem is inside the property and nobody is in danger. Examples include a breaker that will not reset, an outlet or switch that is warm or discolored, a burning smell that you have traced to a particular device that is now unplugged, power lost to part of the building while neighbors are lit, flickering lights that are not widespread, a panel that buzzes, and equipment that trips protection.
Some of these deserve a faster response than others. A panel that is hot to the touch, a smell of hot plastic at the panel, or a breaker that will not stay on and feels warm are urgent, even if there are no flames yet. Say so when you call. If the situation gets worse while you wait, call 911. Never ignore a small warning because it seems minor, and do not keep using a circuit that smells or feels hot.
An electrician will ask what you see, hear and smell, when it started, what has been done, and whether anyone is at risk. They will explain what is safe to do while you wait and what is not. They will also explain the service call charge before dispatch, and give quotes by phone, with an on-site visit for complicated jobs. They cannot see your wiring through the phone, so describe things clearly.
A burning smell: a worked example
Take the case that gives this page its name. You smell something burning in the house or shop, and you cannot see flames. What is the order? First, look around quickly and safely. If you see smoke or flames, leave and call 911. If there are none, but the smell is strong, or comes from a wall, an outlet, the panel or the ceiling, leave the area and call 911, because a fire may be burning inside a wall where you cannot see it.
If the smell is faint and you can trace it to a single appliance or device, unplug it only if you can do so without touching anything hot or damaged and without standing in water. Leave it unplugged and away from anything flammable. Open a window if appropriate. If the smell goes away and does not return, call an electrician to check the circuit and the device before using them again.
If the smell is at the panel or at an outlet, or if it returns, treat it as a fire risk. Do not keep using that circuit. Do not reset a breaker that tripped with a burning smell. Do not open the panel. Tell the dispatcher what you smelled and where. Our page on burning smell with no visible fire goes into more detail.
A sparking outlet and a hot panel: more examples
Suppose an outlet sparks when you plug something in. A brief, small spark at the moment of plugging in a device can be normal in some conditions, but sparks that are large, repeated, accompanied by a pop, a smell, or discoloration are not. If the outlet sparks and you see scorch marks, or if anything is smoking, leave it alone and call 911 if there is fire or smoke. Otherwise, switch off the breaker if you can do so safely, keep the circuit off, and call an electrician.
Suppose the main panel feels warm, hums or smells hot. This is serious. Keep people away. If there is smoke or a burning smell, call 911 first. Do not open the panel, do not touch the breakers, and do not pour anything on it. If it is only warm and nothing else is wrong, call an electrician right away and describe the heat. Do not keep loading the panel with more equipment.
Suppose all the lights go out. Look at the neighbors. If they are dark too, call the power company's outage line. If only your property is dark, look at the panel from the outside for a tripped main, without opening it. If you cannot tell, or if the loss followed a bang or a smell, call an electrician. If there was a bang and you smell smoke, call 911. See our is it an emergency decision chart for a quick guide.
Storms and floods change the order
In a storm, the same order applies but the stakes are higher. Floodwater, fallen trees, wind damage and lightning create hazards that are not obvious. Call 911 for fire, injury or a downed wire near people. Call the power company for outages, damaged poles or lines, and meter damage. Call an electrician for damage to wiring or equipment inside your property, once it is safe.
After a flood, do not enter a flooded area where electrical outlets, cords or equipment could be live. Do not touch water near a panel or an outlet. If you can reach the main breaker without stepping in water, you may turn it off, but if the panel is wet or the floor is flooded, do not go near it, and wait for professionals. Call the utility and ask about disconnecting service at the meter if conditions are unsafe.
In the aftermath of a hurricane, crews are busy and wait times can be long. Do not use that as a reason to attempt repairs on live equipment, to run a generator indoors, or to connect a generator to your wiring without a proper transfer switch. For storm guidance see after-storm power restoration safety and flooded home electrical first steps.
What to do while you wait for help
Waiting is the part people find hardest. A few basic steps help. Get everyone out of the danger area, including pets. Keep a path to the exit clear. If it is dark, use a flashlight, not candles, near a possible electrical or gas problem. Keep children away from outlets, cords and the panel. Do not light a match or lighter if you smell gas, and do not operate switches.
Do not try to fix the problem. Do not open covers, do not touch wires, do not bypass breakers, and do not use water. Do not stand in water or touch a wet appliance. Do not put tape on a cord that is already damaged and keep using it. Do not use a metal or wet object to move a wire. Do not plug a generator into a wall outlet.
Gather the information you will need. Have the address ready, a nearby cross street, the gate or access details, and a description of what happened. Have a phone charged. Write down times and what responders say. If you have a medical device that depends on power, tell the dispatcher and the utility, and have a plan for where you can go. For general readiness see a household emergency plan for power loss.
- Move everyone out of the hazard area and keep pets with you.
- Use a flashlight, not an open flame.
- Do not touch wires, panels or wet equipment.
- Do not use water on an electrical fire.
- Tell the dispatcher about anyone with medical power needs.
Gas smells and carbon monoxide
Electrical problems sometimes overlap with gas. If you smell gas, which is often described as rotten eggs, leave the building at once and call 911 or the gas company from outside. Do not turn lights on or off, do not use a phone indoors, and do not operate any electrical switch, because a spark can ignite gas. This is a rule that overrides the order described above.
Carbon monoxide has no smell. It comes from combustion, including generators, gas appliances and vehicles. If a carbon monoxide alarm sounds, or if people have headaches, dizziness or nausea, get everyone into fresh air and call 911. Do not go back in to find the source. Generators must always run outdoors, well away from openings, and never in a garage.
These two hazards are the reason why the first call is about safety, not about whose job it is. When you are not sure what you are dealing with, 911 can send the right responders and sort it out. Afterward, an electrician can check the wiring and equipment on your side of the meter once the scene is declared safe.
Business, condo and rental differences
In a business, the owner or manager decides who calls, but the order is the same. Clear the area of staff and customers first. Call 911 for fire, smoke or injury. Call the utility for outside problems. Then call an electrician, and tell the landlord or property manager if you rent. Keep a list of numbers at the front desk. See the commercial power loss checklist.
In a condominium or apartment building, add the association or building management to the list. For fires, alarms and smoke, 911 comes first, and follow the building's evacuation instructions. For power problems limited to your unit, the panel inside your unit may be your responsibility, while common equipment belongs to the association. See condo unit power loss, who to call.
In a rental home or apartment, your landlord is usually the first call after 911 for building problems, since they may control repairs and contractors. In an emergency, do not wait for permission to call 911, and do not hesitate to ask the electrician what is safe to do. Keep records of who you called and when.
When you are ready to call us
If the situation is not dangerous but you need an electrician, call and say what is happening. Start with whether anyone is in danger or whether you have called 911. Then describe the symptoms, how long they have been going on, and what you have already done. Tell us the address and how to get in.
We will tell you the service call charge before sending anyone, and quotes for repairs are given by phone, with an on-site visit for complicated jobs. We cannot promise a technician at every hour and place, so the first-call order above is the safest way to protect people while you arrange repairs.
Keep this guide handy. Review the triggers with your family or staff, and post the numbers where they can be seen. The best time to learn the order is before you need it. When you are ready for an electrician, call.
Questions people ask
Should I call 911 or an electrician for a burning smell?
Call 911 if you see smoke or flames, or if the smell is strong or comes from a wall, outlet, ceiling or panel, since a fire may be inside the wall. If the smell is faint and traced to one device that you can safely unplug, leave it unplugged and call an electrician. If it returns, treat it as a fire risk.
When do I call the power company instead?
Call the power company for problems on its side of the connection: a wire on the ground, a damaged pole or transformer, a meter issue, or an outage affecting many properties. If a wire is down or anything is burning, call 911 as well. Stay far away from downed wires, because the ground nearby can be energized.
What if I am not sure whether it is an emergency?
Call 911 and describe what you see, smell and hear. Dispatchers would rather get a call that turns out to be minor than miss a real danger. Once the scene is safe, an electrician can look at the wiring and equipment inside your property. Do not wait to be certain when there is any risk to people.
Can I turn off the main breaker while I wait?
Only if you can reach it safely without touching anything wet, without going near damaged or smoking equipment, and without putting yourself at risk. If the panel is wet, hot, smoking or sparking, or the floor is wet, stay away and wait for responders. Never open the panel cover, and do not touch breakers with wet hands.
What if someone was shocked but seems fine?
Call 911 or arrange medical evaluation anyway if the person was truly shocked, because electrical injury can affect the heart and other organs in ways that are not obvious right away. Do not touch someone still in contact with a live source. Once the area is safe, call an electrician to check the equipment before it is used again.
Do I call the landlord, the utility or an electrician in a rental?
After 911 for any danger, tell the landlord or property manager, since they usually control building repairs. Call the utility for outages or outside equipment problems. An electrician can diagnose and explain what is safe to do. Do not delay 911 for fire, smoke or injury to wait for anyone's permission.
If "Who to Call First in an Electrical Emergency" matches what is happening, call and describe it plainly: the room, the breaker, any burning smell or tripped circuit. We explain what the repair would involve before a visit is set.
Related pages
- Emergency Check: A branching guide from symptoms to urgency, showing when to call 911, when to call the utility, when to call an electrician now, and when a visit can wait.
- Who Fixes What: Where utility equipment ends and customer equipment begins, in general terms, so you know whether to call the power company, an electrician, or 911 first.
- 911 Script: Calling 911 about sparks, smoke, a shock or a downed wire? These are the facts that help dispatch most: address, hazard, people at risk and power status.
- Burning Smell: A burning smell with no flames is still a warning. Learn how to choose between 911 and an urgent electrician call, and what to do while you wait.
- What Never to Do: The instinctive mistakes people make in an electrical emergency, from water on a fire to repeated resets, and what to do instead while you wait for help.
- Appliance Damage: How to triage appliances and electronics after a surge, outage, fire or water event: what to unplug, what to keep off and what to have checked first.
