Electrical help for homes and businessesRequest service
Emergency ElectricianCall (954) 481-0910
Emergency Electrician technician using an infrared camera to inspect a residential electrical panel

Safety and Guides

Utility or Electrician: Who Fixes What?

Electrical service has two halves: equipment owned by the utility and equipment owned by the customer. Knowing roughly where one ends and the other begins tells you who to call, and whether 911 should come first. This guide explains the boundary in general terms, since details vary by utility and by property.

Why the boundary matters in an emergency

When power fails or something sparks, the first practical question is whose problem it is. A utility lineworker cannot repair the inside of your panel, and a private electrician generally cannot touch the utility's energized equipment. Calling the wrong party wastes time, and in some situations it can be dangerous. A homeowner who tries to handle a downed wire, or who assumes the utility will fix a broken weatherhead, can end up waiting for hours while the real problem stays unaddressed.

The boundary is not always obvious from the ground. Most people can see a pole, a line, a meter, and a panel, but may not know which of these belong to the utility and which belong to them. This page describes the general pattern, which is common across much of South Florida, and explains how to handle the gray areas. It is general information only, and the utility's own published rules and the property's own documents are the final word on any particular building.

The general pattern: the meter is the dividing line

In broad terms, the utility owns and maintains the equipment that brings power to your property: the poles, the transformers, the lines, and, in many cases, the service wires that run from the pole or underground vault to the connection at your building. The meter itself is typically utility property as well. The customer generally owns the equipment from the point where the service connects to the building onward: the meter socket or base, the service mast and weatherhead in many overhead arrangements, the main disconnect, the panel, and all the wiring and devices inside.

Emergency Electrician technician installing a pendant light in a bright coastal home

That is a pattern rather than a rule, and details differ. In some places the meter base belongs to the customer but the meter belongs to the utility. In others the point of attachment, where the utility's wires meet the customer's service conductors, is the key location. A technician familiar with the local utility's requirements can usually tell quickly which side a given component is on. If you are unsure, describe what you see, and do not try to settle the question by touching or moving anything.

ComponentUsually belongs toFirst call
Pole, transformer, street wiresUtility911 if downed or arcing, then the utility
Service wires to the houseOften utility, depending on the arrangementThe utility, after 911 if hazardous
MeterUtilityThe utility
Meter socket or baseCustomer in many arrangementsAn electrician, with utility coordination
Mast and weatherheadCustomer in many overhead arrangementsAn electrician, with utility coordination
Main breaker, panel, interior wiringCustomerAn electrician

When to call 911 and the utility first

Anything that involves a downed or sagging line, a wire lying on a fence, tree, or car, a wire that is sparking or burning, a smoking or exploding transformer, or a service cable that has been pulled loose from the building is a hazard to life. The right first call is 911, followed by the utility. Stay well back, at least the length of a bus or more, keep other people and pets away, and do not touch anything that is touching the wire, since the ground and nearby objects can carry current.

Do not try to move a wire with a stick, a broom, or anything else, and do not assume that a wire is dead because it is not sparking. Lines can be energized without any visible sign, and a line that seems dead can be re-energized automatically when the utility's equipment cycles. These are not situations where an electrician can help until the utility has made the line safe. For more detailed situations, see downed wire in the yard and a frayed or sagging service cable.

Problems that start at the meter

The meter area is where the two halves meet, so it is also where confusion peaks. A meter socket that is sparking, a meter that has been pulled or tampered with, or a base that has been cracked by a storm can involve both the utility and the customer. If you see sparks, burning, or smoke at the meter, treat it as an emergency: leave the area, call 911, and then call the utility. Do not open the meter or touch the socket, and do not try to restore power yourself.

In many cases the utility will disconnect power at the meter or the pole and then require that the customer's side be repaired and, where required, inspected before service is restored. That is where an electrician comes in. The electrician repairs or replaces the customer-owned equipment, coordinates with the permitting office as needed, and the utility reconnects once its requirements are met. For more on this sequence, read the power company disconnect and reconnect process.

Problems on the customer side that look like utility problems

A surprising number of outages that seem to be the utility's fault are actually on the customer side. A tripped main breaker, a failed main breaker, a lost phase leg in a panel, a loose neutral, or a burned connection inside the meter socket can all cause a partial or total loss of power while neighbors stay lit. Flickering lights, lights that are too bright, and appliances that run weakly or not at all can also come from customer-side faults, even though they feel like power quality problems from outside.

A quick check helps sort these out. If the neighbors have power and you do not, the cause is more likely on your side. If you have power in half the house, or some 240-volt appliances do not work while lights do, it suggests a problem in the panel or service connection. For details, see half the house without power and whole house out while neighbors are lit. A technician can test both sides safely and tell you which half of the system is at fault.

The weatherhead and service mast

Overhead service is the arrangement most people picture: wires from a pole come to a point on the house, enter a curved fitting called a weatherhead, and run down a pipe, the service mast, to the meter. The weatherhead and mast are commonly the customer's responsibility, even though the utility's wires attach to them. When a storm, a falling limb, or a ladder collision bends the mast or tears the weatherhead, the utility may disconnect the service for safety, and the customer must arrange repair.

A leaning mast, a torn weatherhead, or water entering the service entrance can create both a fire and a shock hazard, because the conductors inside are energized and the water gets into the meter and panel. Do not touch these components, and do not try to straighten them. The sequence is typically to make the area safe, have the utility disconnect if needed, have an electrician repair the customer-owned equipment, arrange any required inspection, and have the utility reconnect. See a leaning or bent service mast for more.

Underground service, condos, and shared equipment

Underground service changes the picture only slightly. The utility's lines run through the ground to a pad-mounted transformer or a handhole, and service conductors continue to the building. Where the utility's responsibility ends and the customer's begins depends on the utility's rules and on how the property was built. In many cases the customer owns the conduit and wiring on their side of a defined connection point. If the ground is flooded, if a pad-mounted transformer is damaged, or if there is a smell of burning from a box in the yard, call 911 and the utility.

Condos, townhomes, and multi-unit buildings add another layer: shared service equipment owned by the association, individual meters for each unit, and common electrical rooms. A unit owner is generally responsible for equipment from the unit's own panel inward, while the association is responsible for common equipment, but the details are set by the building's governing documents. When a whole building is out, contact the association or management early. The page on condo unit power loss and who to call goes into this further.

Generators, solar, and other equipment that complicates things

Anything that feeds power back into the building changes the safety picture. A portable generator connected to the house wiring through an improvised cord or a double-ended cable can send power backward onto the utility's lines, endangering lineworkers who assume those lines are dead. Only properly installed equipment, such as a transfer switch or an interlock installed according to requirements, can safely connect a generator to a home. If you are not sure whether your setup qualifies, power individual appliances through heavy-duty cords instead and keep the generator outdoors and away from openings.

Solar and battery systems also have rules about shutdown and reconnection. Many are designed to turn off during a grid outage so they do not energize utility lines. If a solar or battery system seems to be behaving oddly after a storm or outage, describe it to the dispatcher. See generator backfeed risk for more detail. The key principle is that equipment connected to your side must never be allowed to feed the utility side, and a qualified electrician can help confirm that.

  • Never connect a generator to a wall outlet with a double-ended cord
  • Run generators outdoors, away from doors, windows, and vents
  • Use a properly installed transfer switch or interlock for whole-house connection
  • Ask about how solar and battery equipment shuts down during an outage
  • Tell the dispatcher about any such equipment when you call

How an electrician and the utility work together

In many repairs, the electrician and the utility are not rivals or alternatives but two steps in one sequence. The utility makes its side safe and may disconnect service. The electrician repairs the customer's side, and may need a permit and inspection depending on the scope and the local office's requirements. The utility then reconnects service when it is satisfied that the customer's side is ready. This can take time, and the pace depends in part on the utility's workload, which can be heavy after storms.

An electrician cannot promise when the utility will reconnect, and should not try to. What the electrician can do is complete the customer-side work correctly, explain what the inspector or utility is likely to look for, and help you understand the steps. If a technician tells you that the utility has to act before the work can proceed, that is normal, not a sign of delay on the technician's part. The guide on permits for emergency electrical work adds more on the process.

Telling the dispatcher what you see

When you call, describe the scene rather than guessing at ownership. Say what you can see: where the wire is, whether it is sparking, whether the mast is bent, whether the meter is cracked, whether water is entering. Say whether neighbors have power and whether any breakers are tripped. A dispatcher can use that description to help you work out whether the problem is on the utility side, the customer side, or both, and to decide whether other calls should be made first.

Never take a risk to get a better look. If you cannot safely see the problem from a distance, say so. When you call, the dispatcher will explain the service call charge before anyone is sent, describe how quotes work by phone, and explain that complicated jobs need an on-site visit. If there is smoke, fire, sparks, or a downed wire, call 911 first, then the utility, and then call to arrange the customer-side repair once the scene is safe.

Questions people ask

Who owns the meter?

In most cases the meter itself belongs to the utility, while the meter socket or base is often the customer's responsibility, though this varies by utility and arrangement. If the meter is sparking, cracked, or has been pulled, stay away, call 911 if there is fire or sparks, and then call the utility.

A wire is down in my yard. Who do I call?

Call 911 first, then the utility. Stay far back, keep children and pets away, and do not touch anything the wire is touching, including fences and puddles. Do not assume the wire is dead. An electrician cannot work on it until the utility has made it safe.

Is the weatherhead my responsibility or the utility's?

In many overhead arrangements the weatherhead and mast belong to the customer, while the wires attached to them belong to the utility. If a storm damaged them, the utility may disconnect for safety, and an electrician repairs the customer side before the utility reconnects.

My neighbors have power but I do not. Whose problem is it?

It is more likely on your side of the meter, such as a tripped or failed main breaker, a lost phase leg, or a damaged connection. A technician can test both sides safely and tell you which half is at fault. If you see sparks or burning, call 911 first.

Do I need the utility to do anything before repairs?

Sometimes. If the work involves the service connection or meter, the utility may need to disconnect first and reconnect afterward, and a permit and inspection may be required in between. The technician can explain the sequence for your situation when you call.

Can I connect a generator myself?

Not by plugging it into a wall outlet with a double-ended cord. That can backfeed the grid and injure utility workers. Run the generator outdoors and use heavy-duty cords to individual appliances, or have a transfer switch or interlock properly installed by a qualified electrician.

Talk to Emergency Electrician

If "Utility or Electrician: Who Fixes What?" matches what is happening, call and describe it plainly: the room, the breaker, any burning smell or tripped circuit. We explain what the repair would involve before a visit is set.

Related pages

  • Emergency Check: A branching guide from symptoms to urgency, showing when to call 911, when to call the utility, when to call an electrician now, and when a visit can wait.
  • Disconnect Process: The usual order of events when a service is pulled for repairs in South Florida: who does what, what gets inspected and why power returns when it does.
  • Downed Wire: A wire on the ground may be live even if it is silent. Learn how to keep a safe distance, call 911 and the utility, and what never to do near a fallen line.
  • Meter Base Replacement: What to do when a meter base is burned, cracked or pulled loose, who owns which part, and how the disconnect and reconnect sequence works.
  • Call Order: Electrical trouble, three possible calls. A plain decision order for when to dial 911, when to phone the power company, and when to call an electrician.
  • Mobile Home Electrical: Electrical emergencies in mobile and manufactured homes involve park pedestals, feeder cables and under-home wiring. Learn triage steps and who is responsible.

What to do when you cannot tell which side the problem is on

Sometimes the clues are mixed. Your lights flicker, a neighbor says theirs are fine, and the meter looks normal. In that situation, gather observations before choosing whom to call. Check whether the whole property is affected or only parts of it, whether the problem follows a particular circuit, and whether anything changed recently such as a storm, new appliance or construction. These details help sort out whose responsibility it might be. If anyone in the home depends on powered medical equipment, mention that early so it can be considered when the plan is made.

It is reasonable to contact both the utility and an electrician when the picture is unclear, as long as you tell each what you have told the other. The utility can speak to conditions on its side, such as service to the street, while an electrician can examine your side, such as the panel and wiring. Neither is wasted effort, and each helps rule things out. Be honest if you have already called someone else. Florida humidity, salt air and summer storms add stress to electrical parts, so conditions that seem minor elsewhere can matter more here.

Do not try to examine the meter, the service cable or the mast yourself. These parts carry energy that cannot be switched off from inside the house, and they sit outside the area where a homeowner should work. Keep your distance, keep others back, and treat any downed or damaged line as live. Describe what you see from a safe place and let the proper party decide how to proceed. Keep children and pets away from the area while you wait, and avoid touching anything that feels warm, damp or looks discolored.

Need to discuss an electrical concern or planned project?

Request service
Call (954) 481-0910