Why the meter is a high-risk place
The meter socket, sometimes called the meter base, is where the utility's service reaches your home. Everything electrical in the house flows through it. The conductors inside carry the full supply to the building, and they are protected only by devices that are upstream, at the transformer or on the pole, and not by anything in your panel. That is a crucial point: a fault at the meter is ahead of your main breaker, so your own breakers cannot switch it off.
Because of this, a failure at the meter can release a great deal of energy. An arc at a meter socket can reach very high temperatures, melt copper and aluminum, burn through plastic and blow hot material outward. It can ignite the siding, a wooden wall, nearby plants or stored items. It can also continue for some time, because nothing in the house can interrupt it.
Meter sockets live outdoors. They face rain, salt air, sun, insects, lawn equipment and occasional impacts. Moisture and corrosion are common in South Florida, and years of heat cycles can loosen connections. Storms add water and debris. Where a meter socket is inside a meter room or a cabinet, as in a condo or multi-unit building, other stresses apply, but the principle is the same.

All of this is why sparking or arcing at a meter is treated as an emergency of its own. It is not a place for investigation or a quick fix, and the correct response begins with distance. Stay away from the meter, the wall around it, and the area under the service wires, and keep other people away.
What counts as sparking, arcing or burning at a meter
People describe this in many ways. You might see blue, white or orange flashes inside or around the meter glass or at the edges of the socket. You might hear a crackle, a sizzle, a buzz or a repeating pop. You might notice scorching, soot, melted plastic or a glowing spot. You might smell burning or an acrid odor near the meter. The glass of the meter may be cracked, fogged or blackened. The socket cover may be warped.
Sometimes there is only a subtle sign: a meter that is warm or hot to look at or near, a hum louder than usual, a flickering of lights inside the house that coincides with sounds from the meter, or a brownout that affects only your home. Lights that dim and brighten, or a loss of one half of the house supply, can be the first signs of a loose or damaged connection at the meter.
Weather is often involved. After a rainstorm you may see sparking or smell burning because water has entered the socket. After wind or a fallen tree, the service line or mast may have shifted and stressed the meter base. After a flood, debris or saltwater may have affected it. Summer heat and high air conditioning load add to the stress on marginal connections.
Whatever the signs, if you see or hear sparking, arcing, glowing or smoke at the meter, treat it as an emergency in progress. Related situations are described on cracked or burned meter bases and a bent service mast.
What to do right now
Your first priority is distance and a call. Move away from the meter and keep everyone back, including children and pets. Do not approach to look more closely, and do not stand under the service wires or beneath the mast. If there is any flame, heavy smoke, or if the siding or wall is burning, call 911 immediately and tell them it involves an electric meter.
If you can do so safely and quickly, call the utility's emergency line after 911 to report that there is a fault at the meter, because only the utility can disconnect service ahead of the meter. Typically that means a call to your electric provider, which in much of South Florida is Florida Power and Light, though some cities have their own municipal electric utilities. The number is on your bill and on the utility's website.
Do not touch the meter, the socket, the conduit, the mast or the wires. Do not try to pull the meter out. Do not spray water at it. Do not use a stick, a rake or a ladder near it. Metal, wet objects and even dry wood can be dangerous near a failing meter.
If you have time and it is safe, you can switch off the main breaker in the panel, which reduces the load on the failing equipment. It does not remove power from the meter itself, and it should never replace the call to the utility. Do not enter a room or a garage where the meter is on the other side of the wall if you can see or smell fire there.
Stay clear and wait for responders. Meet them at a safe distance and tell them what you saw and when.
- Move everyone away from the meter and the wires.
- Flames, heavy smoke or a burning wall: call 911 at once.
- Call the electric utility to report a meter fault.
- Do not touch, spray, pull or probe anything at the meter.
- Switch off the main only if it is safe, as a secondary step.
- Wait at a distance and brief the responders.
Utility side versus customer side
Responsibility at the meter is split, and knowing the split helps you call the right party. In general terms, the utility owns the lines coming to your property and the meter itself, which it installs and maintains. The customer typically owns the meter socket or base, the service mast or conduit that carries wires up and to the house, the weatherhead where the wires enter the conduit, and everything downstream including the main breaker and panel. Exact ownership varies with the utility, the type of service and whether the supply is overhead or underground, so these are general terms and the utility can tell you where its responsibility ends.
This matters because a failing meter socket is usually a customer-side repair, while the meter and the lines are the utility's. The utility must disconnect service at its equipment before a customer-side repair, and it must reconnect afterward, typically after any required inspection. An electrician cannot lawfully remove the meter or reconnect service on their own in most cases, so coordination between the electrician, the building department and the utility is part of the repair.
Do not assume that because the problem is at the meter, the utility will repair everything. They may make the situation safe by disconnecting service and then tell you that the socket needs repair by a contractor. The guide on who fixes what and the page on the power company disconnect and reconnect process explain how this commonly unfolds.
In a condo or multi-unit building, the meter bank may belong to the association or the building owner. In that case, notify management as well.
Why sparks appear at a meter
Several mechanisms are behind most meter sparking. The first is water. Rain driven into the socket, a failed seal, a leaking weatherhead above it, or condensation can create conductive paths between live parts. This can cause arcing that is intermittent and weather-dependent, and it can corrode the contacts quickly.
The second is loose or corroded connections. The meter has jaws that grip blades, and the socket has lugs that hold the service conductors. If any of these loosen or corrode, resistance rises and heat and arcing follow. A meter that was inserted without being fully seated can arc as well.
The third is physical damage. Impact from a vehicle, lawn equipment, a falling branch or a ladder can crack the socket, bend the jaws or loosen the conduit. Wind or a tree pulling on the service line can strain the meter base and the mast.
The fourth is age and heat. Plastic and metal parts weaken over time, particularly in strong sun, and salt air accelerates corrosion near the coast. The fifth is overload. A home that has added large equipment such as air conditioners, pool heaters or electric vehicle chargers may be drawing more through an older socket than it was designed for.
Occasionally the cause is on the utility side, such as a failing meter or a problem in the line, and the utility will handle that. Whatever the cause, the response is the same: stay back, call, and let the right parties disconnect and repair. The page on storm-damaged meters and masts covers the storm-related versions of these failures.
Tampering and why it is a separate issue
You may wonder whether a damaged or odd-looking meter has been tampered with. Meter tampering, such as bypassing the meter, removing seals or altering connections, is illegal and dangerous. It can create hidden live parts, loose connections and arcs. If you see broken seals, a meter that has been removed and reinstalled, extra wires, or signs of alteration at a property you own or rent, do not touch it and report it to the utility.
That is distinct from damage caused by weather or age, and this page does not assume tampering. Most sparking meters are the result of moisture, loose connections or physical damage. But because a meter that has been disturbed by someone else can be unsafe, it is worth mentioning what you saw when you call.
If you have just moved into a property, bought a home or taken over a tenancy and discover a questionable meter, keep clear and report it to the utility. Do not try to reseal or reseat it. Only the utility handles its meter and seals.
The same goes for any wiring that bypasses the meter or goes to a second outlet. Unmetered connections are a serious hazard. A qualified electrician can advise on what a compliant installation looks like and can coordinate with the utility. For damaged or loose meter bases that are not tampering, see urgent meter base replacement.
What happens after the utility makes it safe
When the utility has disconnected service, the house will be without power. That is expected. The utility may tag the meter or the socket and tell you that a repair by a contractor is needed before reconnection. They may also tell you that an inspection from the local building department is required, and the details vary by city and county.
At that point, call an electrician and explain what happened, including what the utility said and whether a tag is on the meter. A technician will assess the meter socket, the mast and weatherhead, the service conductors where they enter, the main breaker and the panel. They look for heat damage, melted conductors, corrosion, loose lugs and water intrusion, and determine what needs replacement.
Typical repairs include replacing the meter socket, replacing damaged conductors, repairing or replacing the mast and weatherhead, and checking and sometimes replacing the main breaker or panel if they have been affected. Permits and inspections commonly apply to this work, and the contractor can explain the general process. Once the work passes any required inspection, the utility reconnects service.
The page on permits for emergency electrical work explains the typical questions. The timing of reconnection depends on the utility's schedule and inspections, and no one can promise a particular hour. Keep your phone charged and stay reachable.
Preparing for the electrician call
Have the key facts ready. What did you see, hear or smell at the meter, and when? Was there a storm or wind event? Has the utility been called, and did they disconnect service, tag the meter or give a reference number? Is there visible damage to the socket, the conduit, the mast or the wires? Is the home overhead or underground service? Is it a single-family house or a multi-unit building?
Take photos from a safe distance, for example from across the yard, and do not approach for a better angle. Note the position of the meter and the route to it so that technicians can find it easily. Keep gates unlocked or arrange access, and move vehicles away from the area if you can do so safely.
Think about what you need while power is off. Medications that require refrigeration, medical devices and sleeping arrangements may need a plan. If anyone relies on powered medical equipment, tell the utility and the dispatcher, and make arrangements with your medical provider. Do not run extension cords from neighbors or connect a generator to the house, because those workarounds can create new hazards. See generator safety after a hurricane for safe practice.
Quotes are given by phone only. Complicated jobs need an on-site visit, and there is a service call charge explained on the phone before dispatch. When the fire department and the utility have made the scene safe, call and tell us what happened, and we will explain how the repair would proceed.
Questions people ask
Can I switch off my main breaker to stop the sparks at the meter?
Not reliably. The meter sits ahead of your main breaker, so switching it off does not remove power from the meter or the service conductors. Turning it off may reduce load, but only the utility can disconnect service upstream. Stay away from the meter, call 911 if there are flames or heavy smoke, and call the utility to report the fault.
Who is responsible for a damaged meter socket?
In general terms, the utility owns the meter and its lines, while the customer owns the socket or base, the mast, the weatherhead and everything downstream, though details vary by utility and installation. The utility typically makes the situation safe by disconnecting service, and a contractor repairs the customer-side parts before reconnection. Ask the utility where its responsibility ends.
Is it safe to spray water on a sparking meter?
No. Water conducts electricity and can carry current to you through the stream, and it does not stop an arc at an energized meter. Stay back, keep others away, and let the fire department and utility handle it. If the siding or wall is burning, call 911 and tell them it involves an electric meter.
The sparking stopped. Do I still need to call?
Yes. An intermittent arc can recur, especially when it rains or when the air conditioner starts. Scorching or a cracked meter glass indicates damage. Call the utility to report what you saw, keep clear of the meter, and arrange an inspection and repair by an electrician before relying on that equipment again.
How long until power is restored?
No one can promise a particular time. Restoration depends on the utility's schedule, the extent of the damage, and any permit or inspection required for the repair. An electrician can explain the sequence and prepare the repair so that it is ready for inspection. Keep your phone charged and plan for the possibility of a longer outage.
How does pricing work for a meter socket repair?
Quotes are given only by phone, and complicated jobs need an on-site visit first so the quote reflects the real damage. There is a service call charge, and it is explained on the phone before anyone is dispatched. Permits and utility coordination may be involved, and the contractor can explain them in general terms. Call when the scene is safe.
Reading about "Sparks or Arcing at the Electric Meter"? Tell us what stopped working and when. We will say what an electrician would check first, and quotes are given by phone when the job can be described.
Related pages
- Damaged Meter Base: A cracked, burned or loose meter base is a hazard at the front door of your electrical system. Learn what to do, how reconnection works and about permits.
- Bent Mast: A service mast bent or pulled by a tree, wind or a sagging line is a hazard. Learn what to do, how to work with the utility and what repair and permits involve.
- Meter Base Replacement: What to do when a meter base is burned, cracked or pulled loose, who owns which part, and how the disconnect and reconnect sequence works.
- Mast and Meter: Why damaged meter sockets, masts and weatherheads must be repaired by an electrician before the utility reconnects, and how the process usually works.
- Disconnect Process: The usual order of events when a service is pulled for repairs in South Florida: who does what, what gets inspected and why power returns when it does.
- Small Fire: Small flames at an outlet, cord or appliance still mean get out and call 911. Learn why water is wrong, when an extinguisher is an option and what follows.
