Why a line resting on something is still dangerous
A line touching a tree or fence may seem less urgent than one lying on the ground, since it is not at your feet. In reality the danger can be the same or greater. A live conductor that rests on a branch can send current through the wood, into the trunk and into the ground, especially when the tree is wet, which is common during South Florida's rainy season and after storms. A metal fence that touches a line can carry electricity along its full length and into every gate, post and anyone touching it. A pool enclosure or screen cage frame that contacts a line can become energized, and so can the wet deck and the water.
Lines may also be marked as insulated or look insulated. Many overhead distribution lines have a thin covering that protects against brief contact with branches, but it is not designed to protect people. It does not make the line safe to touch, and it can wear through where it rubs. Do not assume the covering means low risk. Treat any line touching any object as live and treat the object as live too.
What may be energized around the contact point
Think of the contact as the center of an area of risk. The tree and its branches can be live, so can the ground at the base of the trunk, and so can anything touching them. A swing, a ladder, a trampoline, a hammock, a metal chair, a wet lawn, a puddle, a vehicle parked near the trunk or a hose lying in the grass can all carry current to a person. If the object is a fence, the whole run of fence and any metal attached to it may be energized, including gates that you would normally touch every day.

If the line touches a roof, the metal roof, the gutters, the downspouts and the fascia may be live. Inside the house, plumbing and wiring that are bonded to the roof or gutters may carry voltage. People have been hurt while touching a faucet or a metal appliance when a line contacted the roof. If you feel a tingle from water or metal inside the house, leave the building and call 911; our page on shock from a faucet or pipe explains why that happens.
- Tree trunk, branches, and the wet ground around the base.
- Metal fences, gates, posts, railings and anything attached to them.
- Metal roofs, gutters, downspouts and pool cage frames.
- Ladders, swing sets, trampolines, vehicles and hoses near the contact.
Keep your distance and keep others away
Move away from the tree, fence or roof and stay well back, farther than seems necessary. Keep people and pets away. Do not stand under the branches or near the base of the tree. Do not try to cut the tree, pull the branch, push the line off, or remove debris that is touching it. A tree limb under tension can snap and bring the line down onto people. A chainsaw or a pole saw that touches the line can send current through the operator. Even a branch that looks small can hold a line in place.
Do not touch the fence or gate to see whether it is live, and do not use your hands to open a gate near the contact. If you are already touching the object when you realize the problem, let go if you can do so without making things worse, and move away with small steps and your feet together. Keep children inside. If a neighbor's yard is also affected, warn them by calling from a safe place. Our page on a downed wire in your yard or street explains the shuffling technique and the voltage in the ground in more detail.
- Move away from the tree, fence or roof and keep others away.
- Do not touch the object, the ground at the base or anything attached.
- Do not cut, pull or push anything to release the line.
- Keep children and pets inside.
- Call as described in the next section.
The call order: 911, the utility, then others
If there is fire, smoke, sparks, a person shocked, or any injury, call 911 first. If there is no immediate danger but a line is touching a tree, fence or roof, still call 911 or your local non-emergency number if you are told that is the right route, because it is a hazard to the public. Then call the power company's emergency line. Give them the exact address, the nearest cross street, whether the line is touching a tree, fence, roof or other object, whether the object is burning or smoking, and whether the power is out.
Stay at a safe distance while you wait. If the line is across a road or alley, tell the dispatcher so they can protect the traffic. After the utility crew arrives, follow their direction. They will de-energize and clear the line, trim the tree if needed, and tell you when it is safe. If your service mast, weatherhead or meter was damaged by the contact, they may disconnect and tell you to have an electrician repair your equipment. Our guide on what to tell the 911 dispatcher can help you give clear information.
Trees on service lines: what is yours and what is the utility's
A tree touching the line that feeds your house raises questions about responsibility. In general the utility maintains the lines and clears vegetation near its primary and secondary lines, though practices vary. The service drop to your house may be trimmed by the utility or may be left for you to arrange through a qualified tree service, particularly where limbs are not yet touching. Whatever the practice, never trim a tree that is touching or close to a line yourself. Only qualified line-clearance workers should work near energized lines.
Call the utility and ask how they handle trimming near the service drop. If a limb is already against the line, report it as a hazard. Do not hire an ordinary tree crew to cut a limb on a live line unless the utility has de-energized and grounded it. After the contact is cleared, an electrician may need to inspect your mast, weatherhead and service conductors, since a limb that rubbed or pulled on them can leave damage that is not obvious from the ground. Our page on a tree falling on the service line describes the more severe version of this problem.
- Never trim or cut a tree that touches or is near a line.
- Ask the utility who is responsible for trimming near the service drop.
- Use only qualified line-clearance workers near energized lines.
- Have your own mast and weatherhead inspected after contact.
Fences, pool cages and wet yards in South Florida
Many South Florida yards have metal fences, aluminum pool cages, screen enclosures, and wet ground. During storm season, saturated soil and standing water make a contact much more dangerous, because current flows more easily to ground. A downed or resting line near a pool can energize the water; no one should enter the pool or spa, and children and pets must be kept away. Do not use a pool net, skimmer pole or hose near a cage or fence that may be energized, and do not turn on pool equipment until the area has been cleared.
Fences that are bonded to the house or to a pool cage can pass voltage along their entire length. If a line touches a neighbor's fence, your fence may be live as well. Avoid touching fences and gates all along the property line until the utility confirms it is safe. Our page on pool and spa electrical safety after a flood explains how pool equipment is affected.
If the line is on your roof or the house is affected
If a line is touching your roof, gutter or mast, stay inside only if there is no smoke, burning smell or fire, and keep away from metal pipes, faucets and appliances. Do not touch the electrical panel, the meter or any metal near the point of contact. If you smell smoke or burning, leave the house, move well away from the building and any trees, and call 911 from outside. Do not go back in to collect items.
Switching off the main breaker does not make the utility's line safe, and it does not remove the hazard on the roof. The line may be live up to the weatherhead and at the roof. Wait for the crew. After the line is cleared, an electrician should check the mast, weatherhead, service conductors and panel for heat damage, and the roof and gutters for burns. Our page on a leaning or bent service mast and a torn weatherhead describe related damage.
After the line is cleared: inspection and repair
After the utility has cleared the contact, an electrician can inspect the equipment that belongs to the property. This normally includes the service mast and its bracing, the weatherhead and drip loop, the service conductors, the meter socket and the main breaker and panel. The technician looks for burned insulation, pitting on conductors, loose connections, and moisture. Tree contact can cause arcing damage that is not visible from the ground, and a mast that was tugged by a limb may have pulled loose from its support.
Repairs range from replacing a weatherhead or re-securing a mast, to replacing damaged service conductors, a meter socket or a panel. Permits and coordination with the utility are normal for service work, and the technician can explain the steps. Complicated repairs usually need an on-site visit before a quote can be given, and quotes are given only by phone. A service call charge applies and is explained on the phone before dispatch. Our page on urgent service mast repair shows how that kind of job is approached.
- Mast, bracing and weatherhead for bending, cracks or looseness.
- Service conductors for burned or damaged insulation.
- Meter socket and main breaker for scorch marks or moisture.
- Grounding connections that may have been damaged.
Scenarios: three common versions of this call
A palm frond in a windstorm lands on the line that feeds the house next door and stays draped across it. The fronds are wet, the lawn is soaked, and a child wants to retrieve a ball under the palm. The right move is to bring the child in, keep the area clear, and call. The frond itself can carry current, and the ground at the base of the palm may be energized even though nothing looks wrong. There is no repair to make until the utility has cleared the line.
A line sags onto a chain-link fence after a truck clips a pole in the alley behind a row of houses. Every fence section along the block may be connected, so a person leaning on a fence several houses away could be at risk. Neighbors on both sides need to be warned from a distance, the alley should be kept clear, and responders need the exact location. This is a case where a quick call from several people is helpful, and no one should walk the fence line to check.
A service drop to a single-story block house touches the roof edge after a branch pulls it down, and the metal drip edge and gutter are in contact. The family inside notices a tingle at the kitchen sink. They should leave the house, move away from the building, and call 911, then the utility. Later, an electrician checks the mast, the meter and the panel before any reconnection.
Prevention and what to have ready when you call
The best prevention is to keep trees away from lines through the utility's trimming program or a qualified contractor, and to watch for limbs that are growing toward the service drop. After storms, look at lines from a distance, and report any that are sagging, burned or touching trees. Plan ahead for storm season by learning where your main breaker is and saving the utility's emergency number.
When you call, say what the line is touching, whether there is smoke, sparks or burning, whether the power is out, whether the object is metal or wood, and whether pools, vehicles or people are near. Give the address and say whether you own or rent. The right response to a line touching a tree, fence or roof is to keep away, make the calls, and wait. When the area is safe and you suspect damage to your own equipment, call so a qualified technician can check it.
Questions people ask
Is a power line resting on a tree dangerous if nothing is sparking?
Yes. A live line can send current through wet wood into the ground without visible sparks, and the tree and the ground around it may be energized. Stay away, keep others away, and call 911 and the utility. Do not touch the tree, the ground at its base or anything attached to it.
Can I trim the branch that is touching the line?
No. Cutting or moving a branch that touches a line can drop the line, send current through the tool, or release a branch under tension. Only qualified line-clearance workers should work near energized lines. Report the hazard to the utility and let them handle it.
A line is touching my neighbor's fence. Is mine at risk?
Possibly. Metal fences are often connected along the property line, and current can travel along them. Avoid touching any metal fence or gate near the contact until the utility has confirmed that it is safe. Tell your neighbor from a safe distance and call the utility.
Should I turn off my main breaker?
Switching off your main breaker does not make the utility's line safe, and it does not remove the hazard on the tree, fence or roof. Do it only if you smell burning or see heat at your own panel and can reach it safely. The priority is to stay away and call 911 and the utility.
Who fixes my service mast if the line pulled it?
The utility repairs its own lines. The property owner usually owns the mast, weatherhead and meter socket, so an electrician repairs those. The utility may disconnect the service until repairs are done and inspected. Call an electrician after the utility has cleared the line, and ask about permits.
Is it safe to be in the pool if a line touches a pool cage?
No. A line touching the cage frame or the deck can energize the structure and the water. Keep everyone out of the pool and spa, and away from the cage and any metal fencing, until the utility confirms the area is safe. Do not use pool equipment until it has been checked.
Reading about "A Power Line Is Touching a Tree or Fence"? Tell us what stopped working and when. We will say what an electrician would check first, and quotes are given by phone when the job can be described.
Related pages
- Downed Wire: A wire on the ground may be live even if it is silent. Learn how to keep a safe distance, call 911 and the utility, and what never to do near a fallen line.
- Tree on Line: A tree pulled down the service line to your house. Learn who handles mast, drop and conduit damage, what to avoid, and how to coordinate the repair.
- Bent Mast: A service mast bent or pulled by a tree, wind or a sagging line is a hazard. Learn what to do, how to work with the utility and what repair and permits involve.
- Pool After Flood: After a flood, pool and spa electrical systems can be dangerous. Learn why the pool stays off until inspected and what a technician checks on pumps and bonding.
- 911 Script: Calling 911 about sparks, smoke, a shock or a downed wire? These are the facts that help dispatch most: address, hazard, people at risk and power status.
- Small Fire: Small flames at an outlet, cord or appliance still mean get out and call 911. Learn why water is wrong, when an extinguisher is an option and what follows.
