Electrical help for homes and businessesRequest service
Emergency ElectricianCall (954) 481-0910
Emergency Electrician technician repairing and testing a wall outlet in a South Florida home

Urgent Repair

Urgent Service Mast Repair

The service mast is the pipe that lifts the power company's wires to your roofline and carries your home's service cable down to the meter. When a storm, a tree or a ladder bends it, the repair involves the utility and an electrician working in order. This page explains the steps.

Triage: wires down, sparks and fire come first

A damaged service mast can leave energized wires hanging or touching things. If you see a wire down, a wire arcing, flames at the weatherhead or the meter, or smoke coming from the service equipment, move away, keep others away, and call 911. Then report it to the utility. Treat every wire as live, including one that appears to lie harmlessly on the ground or on a fence. Do not touch it, do not drive over it, and do not move it with a stick or a tool.

Do not approach the equipment, and do not try to switch off the main breaker if the meter or the mast is sparking or burning. The main breaker cuts power inside the house, but the cable between the utility's wires and the main breaker remains energized, and a fault there is outside the reach of any switch you can operate. Only the utility can cut power to the service drop, and only after the fire department or utility crew has made the area safe.

If the mast has been bent or pulled but nothing is sparking, the situation is still urgent, because a damaged mast can pull the service cable out of the weatherhead, expose conductors or strain the meter. Stay clear of the area, keep children and pets inside, and call. This page explains the process that follows. For the emergency side of the problem, see our pages on a service mast that is leaning or bent and a downed wire in the yard.

Electrical diagnostic camera, insulated tools, safety glasses, gloves, and Emergency Electrician branded equipment

What the mast and entrance equipment are

Most overhead-served homes have a service drop: wires from the utility pole to the house. At the house, the drop attaches to the service mast or to a point on the building, and then connects to the service entrance conductors that run through the weatherhead, down a pipe, into the meter socket and on to the main panel. The weatherhead is the curved cap at the top of the mast that keeps rain from entering the pipe.

The mast itself is a rigid metal pipe, often with a bracket or support that holds the pull of the utility wires. In some homes, the mast rises through the roof, with a flashing that must be kept watertight. The utility owns the drop wires and usually the meter. The homeowner owns the mast, the weatherhead, the service entrance conductors, the meter socket and everything after it. That division is at the heart of any repair.

Homes in South Florida with underground service have a different arrangement, with a lateral that comes up to the meter, and they have no mast. But overhead service is common in many older neighborhoods in Broward County and the cities from Boca Raton to North Miami, and these masts are exposed to wind, falling limbs and ladders. A mast that carries a heavy drop in a hurricane can bend, crack or tear from its fastenings.

What storms and accidents do to service entrance equipment

High winds and falling trees can pull on the utility drop, bending the mast, loosening the bracket, or tearing the weatherhead from the pipe. A tree limb can tear off the weatherhead entirely, exposing the conductors to rain. Even if the wires hold, the pull can crack the roof flashing, letting water into the attic along the mast. A bent mast can also strain the meter socket and the conduit below, loosening connections.

Water that enters through a torn weatherhead can run down the service conductors into the meter socket and the panel. Saltwater and heavy rain make this more damaging. Corrosion on conductors and lugs follows, which may cause overheating weeks later. Vehicles, ladders, tree trimmers and pressure washers can also damage the mast. Aging is a factor too: rusted masts and brittle conductors fail more easily.

After a storm, the damage may not be obvious from the ground. A mast can lean slightly, a weatherhead can have a cracked seal, or the conductors inside can be strained. Flickering lights, a buzzing meter, water in the meter, or a panel with moisture are all clues. If you notice any of them after a storm, see our page on storm-damaged meter and mast and call.

Who does what: utility versus electrician

Because the service drop belongs to the utility and the mast belongs to you, a repair is a coordination exercise. The electrician cannot touch the utility's energized wires. The utility will not repair your mast. In a typical sequence, the utility disconnects power to the service drop, either at the pole or by pulling the meter, so that the electrician can work safely. The electrician then repairs or replaces the mast, weatherhead and any damaged conductors and equipment. The electrician has the repair inspected where required, and the utility reconnects power.

The exact process varies. In South Florida the utility may be FPL or a municipal utility depending on the city. Some require an inspection and a release before they reconnect, and some can reconnect once the electrician confirms the work. You may need to call the utility yourself to request a disconnect or to report damage, and the electrician may arrange the rest. Ask the electrician what to expect.

In an emergency, such as a downed wire or a burning meter, the fire department or utility crew comes first and cuts power. Repairs follow once the area is safe. A page on the power company disconnect and reconnect process explains the general flow, and our guide on which party fixes what clarifies ownership. Do not assume the utility will fix the mast, and do not assume an electrician can work on the drop.

What you can safely do and observe

From a safe distance on the ground, you can note what you see. Is the mast leaning, bent or pulled away from the wall? Is the weatherhead torn, cracked or missing? Are wires sagging, stretched or on the roof? Is a tree limb on the wires or the mast? Is the meter tilted, cracked or open? Do you see scorch marks? Is water running down the pipe? Take photographs from a distance of several car lengths, and never walk underneath the wires to get a better angle.

Inside, check the panel without opening it. Is the main breaker on? Are lights flickering or dim? Do you hear a buzzing from the panel or the meter? Is there a smell? Is there moisture in the panel area? If the panel feels warm or you smell burning, call 911. Do not climb onto the roof, and do not use a ladder near the wires. The service drop is typically at head height of a ladder, and a ladder near a damaged drop is a deadly mistake.

Keep a list of what you see, when it happened, and what the weather was. If a tree caused the damage, note whose tree it was and where it stands. If a contractor or a vehicle caused it, note who. This information helps the utility, the electrician and the insurer. Do not cut or move tree limbs that are on or near the wires. Wait for the utility.

  • Whether the mast is bent, leaning or pulled from the wall
  • Whether the weatherhead is torn, cracked or missing
  • Whether wires are down, sagging, on the roof or touched by a limb
  • Whether the meter is tilted, damaged or sparking
  • Whether there is water in the meter or panel, or a burning smell

How the electrician repairs the mast and service entrance

After the utility has disconnected power, the electrician inspects the damage. They examine the mast, the bracket, the weatherhead, the service entrance conductors, the meter socket, the connections and the panel. They check the roof flashing and any wall penetration for water entry. They decide whether the existing pipe can be straightened or must be replaced, whether the conductors are damaged or wet, and whether the meter socket and the panel are intact.

Typical repairs include replacing the mast and weatherhead with new sections of proper size and rigidity, securing the mast with approved brackets and support, replacing damaged or water-exposed service conductors, replacing a damaged meter socket, resealing the roof penetration, and checking and tightening all connections. The mast must be tall enough to provide the required clearance for the utility's wires and must be able to bear the pull of the drop. Those requirements are set by the utility and the local jurisdiction.

Where the damage reaches the panel, for example if water has entered it or the main breaker has been damaged, the work expands. See our page on emergency panel replacement if that applies. The technician explains the extent of the damage and the options, and you decide. In most cases, an on-site visit is necessary for the assessment, because the scope depends on conditions that cannot be known from a description.

Permits, inspection and reconnection

A mast and service entrance repair is regulated work in nearly all jurisdictions. The electrician obtains the permit, completes the work, and requests an inspection. The inspector checks the mast's height and support, the weatherhead, the conductors, the meter socket, the grounding and the connections. In many areas, the utility does not reconnect power until the inspection is approved, or until the inspector has released the service. Local procedures differ.

During declared emergencies, such as after a hurricane, some jurisdictions use expedited procedures for restoring power to homes with damaged service equipment. These can include temporary approvals. The details vary, and the electrician and the building department are the right sources. Do not assume that a shortcut is allowed, and do not let anyone reconnect or energize the service without the required approvals.

Once the inspection is approved and the utility has reconnected, check the home. Make sure lights are steady, the panel is quiet, and the main breaker feels normal. Keep copies of the permit and the inspection record. If the home was without power for a period, see our page on power returns and breaker trips for what to expect as circuits come back.

Preparing for the call and the visit

When you call, explain what you see: bent or torn mast, damaged weatherhead, wires down, a tilted meter, water entry, scorching or a tree on the equipment. Say whether power is on or off, whether the utility or fire department has been contacted, and whether anyone is in danger. Mention any medical equipment or critical needs. The dispatcher will direct you to 911 if the situation is dangerous and will ask what the utility has already done.

Quotes are given only by phone. Service mast repair depends on the damage, the equipment, the utility's requirements and the permit process, so an on-site visit is needed before a firm figure can be given. A service call charge applies and is explained on the phone before anyone is dispatched. The dispatcher cannot promise an arrival time, and the utility controls its own schedule.

Before the visit, keep clear of the area, secure pets, move vehicles away from the equipment, and clear a path to the panel and the meter. Do not remove fallen limbs from the wires. Have the photographs ready, and the utility's reference number if you called them. When you are ready to have a qualified electrician assess the equipment and work with the utility, call and describe what is happening.

  1. If wires are down, sparking or burning, call 911 and then the utility, and keep everyone away.
  2. Do not touch, move or approach wires, the mast or the meter, and do not use a ladder near them.
  3. Photograph the damage from a safe distance.
  4. Note whether power is on, and what the utility or fire department did.
  5. Call and describe the damage and what you have already reported.

Questions people ask

Who is responsible for the service mast, me or the power company?

In general, the utility owns the wires that reach your house and usually the meter, while you own the mast, weatherhead, service entrance conductors, meter socket and everything after it. Exact boundaries can vary by utility and location, so confirm with the utility. An electrician repairs your side, and the utility handles its own equipment.

Can I fix a bent mast myself?

No. The service drop wires attached to the mast are energized and cannot be turned off from inside the house. Working near them can be fatal. Only the utility can disconnect them, and only a qualified electrician should repair the mast and entrance equipment once power is cut at the source. Stay clear and call.

Will the power company disconnect power so repairs can start?

Utilities generally disconnect the service drop or pull the meter so repairs can be done safely, but procedures and scheduling vary by utility and by situation. The electrician usually coordinates, though you may need to request the disconnect yourself. In an emergency, the fire department or utility crew will make the area safe first.

Will the repair need a permit and inspection?

In nearly all jurisdictions, yes. The electrician pulls the permit, completes the repair, and requests an inspection. The utility may need the inspection approved before it reconnects power. Procedures differ by city and county and may be adjusted after major storms. The electrician will explain what applies where you live.

What if the weatherhead is torn but the power still works?

It is still urgent. Rain can enter the pipe and run into the meter socket and the panel, causing corrosion, shorts and shock hazards. Exposed conductors are also a danger. Keep away from the equipment, avoid touching the meter and panel, and call. A technician will coordinate with the utility to make the repair.

How can I find the price for mast repair?

Quotes are given only by phone. Because the scope depends on the damage, the equipment, utility requirements and permits, an on-site visit is needed before a firm figure can be given. A service call charge applies and is explained on the phone before anyone is dispatched.

Talk to Emergency Electrician

About "Urgent Service Mast Repair": call and give us the details, and we will explain what is safe to do while you wait and what the visit would cover. Jobs that cannot be quoted blind need a look on site.

Related pages

  • Bent Mast: A service mast bent or pulled by a tree, wind or a sagging line is a hazard. Learn what to do, how to work with the utility and what repair and permits involve.
  • Torn Weatherhead: A torn or leaking weatherhead lets rain run down the conduit toward the meter and panel. Learn the danger, the order of coordination and what repair involves.
  • Mast and Meter: Why damaged meter sockets, masts and weatherheads must be repaired by an electrician before the utility reconnects, and how the process usually works.
  • Disconnect Process: The usual order of events when a service is pulled for repairs in South Florida: who does what, what gets inspected and why power returns when it does.
  • Meter Base Replacement: What to do when a meter base is burned, cracked or pulled loose, who owns which part, and how the disconnect and reconnect sequence works.
  • Service Upgrade: When a failed electrical service leads to an upgrade, how repair comes first, what a technician evaluates, and how the permit and utility steps work.

Reading the damage: what a bent or pulled mast tells the technician

How a mast is damaged says a great deal about what else may be affected. A mast leaning away from the house suggests the service wires were pulled by a falling limb or a strong gust, which may have stressed the weatherhead, the connections behind it and the cable running down to the meter. A mast cracked at a bracket points to rot or corrosion in the attachment. A cut or chafed section implies exposed conductors that could be energized. The technician reads these clues carefully before any repair so that hidden damage is not missed.

Inside the wall, the story continues. Strain on a mast can loosen the conduit where it enters the building, let water run down toward the meter socket and cause cracks or pull-outs in the fittings. The technician checks whether the pipe is still firmly fastened, whether the mast is straight and sound, and whether the clearances above the roof and the ground still look right. Where the structure has been damaged, such as a fascia board or roof edge that held the mast, the carpentry may need attention before the electrical parts can be mounted securely again.

Everything the technician finds is explained to you in terms you can follow before any repair begins. That includes what can be reused, what must be replaced and what depends on the utility. Do not try to straighten a leaning mast or push a hanging cable aside yourself, and keep people and pets away from the area. Call us, tell us exactly what you saw and share photos taken from a safe distance. We will describe the process and confirm availability, with no promises about timing that depend on factors outside our control.

Need to discuss an electrical concern or planned project?

Request service
Call (954) 481-0910