Electrical help for homes and businessesRequest service
Emergency ElectricianCall (954) 481-0910
Emergency Electrician technician repairing and testing a wall outlet in a South Florida home

Safety and Guides

Whose Repair: What to Know and Do

When something electrical fails, the right call depends partly on who owns what. Owners, tenants, landlords, and condo associations each have different responsibilities. This guide explains the basics in general terms so you can speed up the right call. For fire, smoke, or a downed wire, call 911 and the utility first.

Safety is never waiting for permission

Before anything else, understand that safety does not depend on who owns the equipment. If there is fire, smoke, a burning smell that is growing, a person who has been shocked, or a downed wire, call 911 and the utility immediately, no matter whether you own, rent, or share the building. Nobody needs a landlord's or an association's approval to call for emergency help, and no lease provision should stop you from leaving a dangerous building. Questions of responsibility and payment can be sorted out after everyone is safe.

Once the scene is safe, responsibility matters because it determines who can authorize repairs, who may need to be notified, and who pays. Getting this right early speeds up the repair and avoids disputes. This page is general information, not legal advice. Your lease, deed, declaration, and governing documents, along with Florida and local rules, decide your actual rights and duties. When in doubt, ask the responsible party in writing and keep a copy.

The owner-occupied home

If you own and live in a single-family home, you are generally responsible for the electrical system from the point where the utility's service connects to your building inward. That includes the service entrance equipment you own, the meter base in many arrangements, the main breaker, the panel, all interior wiring, devices, and fixtures, and outdoor circuits such as lighting, pool equipment, and outlets. The utility is responsible for its own lines, transformers, and, usually, the meter. For a clearer picture of that boundary, see utility or electrician: who fixes what.

Electrical diagnostic camera, insulated tools, safety glasses, gloves, and Emergency Electrician branded equipment

As the owner, you decide who does the work and you approve the quote. You also carry the paperwork: permit documents, records of repairs, and any insurance claim. If the home has a mortgage, a lender may take an interest in major repairs after a loss event, and your insurer may have its own requirements. Keep photographs and written findings from the start. Because you are in charge, you also have the most flexibility, which makes it all the more useful to ask good questions before approving anything.

The rental: tenant and landlord roles

In a rental, the landlord generally owns the building and the fixed electrical system, and the tenant owns their personal belongings. In most arrangements, repairs to the building's wiring, panel, and permanently installed equipment are the landlord's responsibility, while damage caused by the tenant's own actions or items can be treated differently. Florida law and the lease define the details, including how and when a tenant must give notice of a problem and what a landlord must do in response.

As a tenant, the practical steps are simple. In an emergency, call 911 and the utility. Then notify the landlord or manager promptly, preferably in writing, describing the hazard and when you noticed it. Keep a copy and photographs. Do not hire an electrician to repair the building yourself without checking first, since the landlord may need to authorize the work, and unauthorized repairs can create complications. The guide on renters and electrical emergencies explains what tenants can do when a reported hazard is not addressed.

  • Call 911 and the utility for fire, smoke, or downed wires
  • Notify the landlord or manager promptly, in writing if possible
  • Photograph the problem and keep a dated record
  • Do not hire repair work on the building without checking first
  • Keep your own belongings safe and keep a list of anything damaged

The condo: unit owner and association

Condominiums divide the building between what the unit owner controls and what the association controls. Generally, the association is responsible for common elements: the building's main service, shared electrical rooms, common area lighting, elevators, and the wiring and equipment that serve more than one unit. The unit owner is responsible for what lies inside the unit, which commonly includes the unit's panel and the wiring and devices beyond it, though the boundary depends on the declaration and the building's design.

That means a total outage in a unit might be the owner's problem or the association's, depending on where the fault is. If neighbors are also out, or common areas are dark, contact management right away. If only your unit is out and the building is otherwise normal, the cause may be inside the unit. Condo rules may also affect how contractors enter the building, when work can be done, and what insurance or paperwork a contractor must show. See condo unit power loss and who to call for the general pattern.

Townhomes, HOAs, and shared walls

Townhomes and communities with homeowner associations vary even more. Some townhomes are fee simple, with each owner responsible for their own building and a shared maintenance arrangement for common areas. Others are condominiums in townhome form, with the association owning more. Community equipment such as gates, entry lighting, and pool houses is usually the association's responsibility, even if residents feel the effects most.

Shared walls and shared service raise a particular concern: a problem in one unit can affect another. A smoldering fault in a wall that separates two units, for instance, is a risk for both. If you smell burning or see smoke, leave, call 911, and alert neighbors. For community equipment problems, the guide on HOA and community gate power failure describes how those calls typically go.

Commercial tenants and leased business space

Business owners in leased space face a similar question with higher stakes. The lease typically allocates responsibility for the building's electrical systems and the tenant's equipment, and may require the tenant to use approved contractors or to notify the landlord before electrical work. Tenant improvements, such as added circuits for equipment, may be the tenant's responsibility even where the base building is the landlord's.

When an outage threatens inventory, customers, or safety, speed matters, but so do the lease terms. Notify the landlord or property manager at once, ask who handles the problem, and ask whether an electrician of your choosing may proceed. Keep records of the outage and its effects, which may matter for insurance and for lease disputes. See tenant and landlord power responsibility for the commercial side of this question.

Why the responsible party matters to the dispatcher

Telling the dispatcher whether you own, rent, or live in a condo helps in several ways. It determines who must approve the visit and any repair. It affects how the technician communicates findings, since a landlord or manager may need a written description. It affects access: a technician may need a key, a building contact, or permission to enter a shared electrical room. And it affects the sequencing of work, since some repairs cannot begin until the responsible party has signed off.

If you are not the one who will approve or pay, tell the dispatcher who is and how to reach them. If you are unsure whether the equipment belongs to you, describe what is failing and where it is, and the technician can often help identify the likely owner. Do not delay a safety call while sorting this out. The service call charge is explained by phone before dispatch, and the dispatcher can tell you how it is handled when someone other than the caller is responsible.

Insurance and documentation across housing types

Insurance follows ownership, too. Homeowners generally look to their homeowner policy, tenants to renter's coverage for their belongings, and condo owners to a unit policy that works alongside the association's master policy. Which policy responds to an electrical loss depends on the cause, the location of the damage, and the policy terms, and it is a conversation to have with the insurer, not something a contractor can decide.

Whatever your situation, documentation helps. Photograph the damage before any repair. Keep written findings from the technician, receipts, and the names of everyone involved. Record when you notified landlords, associations, and insurers. The guides on electrical damage and insurance documents and photographing the damage before repairs explain what to gather and why. A clear record shortens disputes and helps everyone get to a repair faster.

When responsibility is unclear or disputed

Sometimes nobody agrees who is responsible. A landlord may say a problem is the tenant's doing. An association may say a failure is inside the unit. A unit owner may say the cause is a shared riser. In these cases, an inspection that identifies the actual cause is valuable. A written description of findings, with photographs, can resolve questions that arguments cannot. It may show that a fault originates in common equipment, or that a tenant's appliance caused a local failure.

Where a hazard continues while the dispute is argued, do not wait. Make the area safe, keep people away from it, and call for help. Responsibility can be settled afterward, and records of the hazard and of your attempts to report it will support your position. The guide on getting a written findings report explains how to ask for one. If the dispute becomes serious, consider asking a lawyer or tenant resource for advice specific to your situation.

Three short examples of how responsibility plays out

Example one: an owner of a single-family home finds the main breaker will not stay on after a storm. The home is theirs, so the electrician reports findings to them, they approve the repair, and they handle any permit and insurance paperwork. Example two: a tenant in an older apartment smells burning near an outlet. After calling 911 if the smell is strong, the tenant notifies the manager in writing, photographs the outlet from a distance, and the landlord arranges the repair of the building wiring.

Example three: a condo unit owner loses power in the unit only. The building is otherwise normal, so the cause may be inside the unit, and the owner arranges the inspection. But if the electrician finds the fault in a shared riser or the building feed, the association becomes responsible, and the findings go to management. In each example, one clear step, deciding who owns the failing part, determined who called, who approved, and who documented.

Keeping a simple record from the first hour

Whatever your housing situation, a short record pays off. Write down the date and time you noticed the problem, what you saw and smelled, which breakers were involved, and who you notified and when. Photograph the area from a safe distance before anything changes. Save messages to landlords, managers, and associations. If a technician visits, note the name and what was said, and ask for written findings.

Records protect everyone. They show a landlord that a problem was reported promptly, they show an insurer what the situation was before repairs, and they show a technician what has already been tried. They also help if responsibility is disputed later. Keep the record in one place, such as a folder on your phone, and add to it as things develop. A few minutes of notes in the first hour are far more reliable than memory a month later.

Ready to call: what to have in front of you

When you call, have the address, your housing situation, and the name and contact information for the landlord, manager, or association if they are involved. Have a short description of what failed, what you saw, heard, and smelled, which breakers are tripped, whether neighbors have power, and whether anything is wet. Mention anyone who depends on powered medical equipment and any children, pets, or older adults in the home.

The dispatcher will explain the service call charge before anyone is sent, and describe how quotes work by phone, with an on-site visit for complicated jobs. If another party must approve the work, say so, and the dispatcher can explain how that is usually handled. If at any point you see flames or heavy smoke, stop and call 911 first. Otherwise, call when you are ready, and sort out the questions of responsibility with the help of the dispatcher and the technician.

Questions people ask

Can a tenant call 911 or the utility without telling the landlord first?

Yes. Safety does not wait for permission. Call 911 for fire, smoke, or injury and the utility for downed wires, then notify the landlord promptly, preferably in writing, with photographs and the time you noticed the problem.

Who is responsible for the panel in a condo unit?

That depends on the building's governing documents, but commonly the unit owner is responsible for the unit's own panel and wiring, while the association handles common equipment and the building's main service. Check the declaration or ask management, and tell the dispatcher what you know.

Can I hire an electrician to fix my rental myself?

Check first. The landlord may need to authorize work on the building's wiring, and unauthorized repairs can cause disputes. In a real emergency, make the area safe and call for help, then notify the landlord right away and keep records.

What if the landlord will not fix a hazard?

Document the hazard with photographs, send written notice, and keep copies. Florida law and your lease set the process, and local tenant resources or an attorney can advise on your situation. Where there is danger to life, call 911 and leave the area.

Whose insurance covers electrical damage?

It depends on who owns what and on the cause of the loss. Homeowners, renters, and condo owners each have different coverage, and associations have master policies. Only the insurer can answer for your policy. Keep photographs, written findings, and receipts.

What if I do not know who owns the failed equipment?

Describe what is failing and where it is when you call. The technician can often help identify the likely owner, such as the unit owner, the association, the landlord, or the utility. Do not delay a safety call while you figure it out.

Talk to Emergency Electrician

If "Whose Repair: What to Know and Do" matches what is happening, call and describe it plainly: the room, the breaker, any burning smell or tripped circuit. We explain what the repair would involve before a visit is set.

Related pages

  • Renters: What a renter should do in an electrical emergency: safety first, how to alert the landlord, what to document, and when to call an electrician yourself.
  • Who Fixes What: Where utility equipment ends and customer equipment begins, in general terms, so you know whether to call the power company, an electrician, or 911 first.
  • Unit vs Building: Your condo unit lost power. Sort a unit panel problem from a building fault, know who to call first, and what to tell the manager and the electrician.
  • Tenant and Landlord: Power out at a leased business space? Learn how responsibility is usually divided between tenant and landlord, and why the lease comes first.
  • Emergency Permits: How urgent electrical repairs still move through permits and inspections in South Florida, what usually needs one, and what to ask before work starts.
  • Insurance Documents: Which records to gather after an electrical failure, fire, flood or surge: receipts, photos, technician findings and notes, without claims about coverage.

Writing the request so it gets acted on

When you need a landlord, an association or a property manager to act, the way you describe the problem can speed things up or slow them down. Write a short message that states what you saw, where, and when it began, and attach a clear photo if you can take one safely. Avoid guessing at the cause. Say something like the outlet in the hallway is warm to the touch and a breaker keeps tripping, rather than that the wiring is bad. Facts are easier to act on than conclusions.

Send the message in a form that leaves a trace, such as email or the portal your building uses, and note the time of any phone call you make. If the situation involves heat, smoke, sparks or a burning smell, say clearly that it is a safety matter and that you have turned off what you safely can. This helps the other party understand why delay matters. It also protects you later, since you can show that you reported promptly and described the hazard in plain terms. If the situation changes while you wait, such as a new smell, sound or warm surface, treat that as new information and call again.

Ask a direct question in the message so the reply cannot be vague, such as who will arrange the repair and by what day you can expect an update. Do not demand a particular contractor unless your lease allows it, and do not hire work inside a shared system without checking first, because that can create disputes about who owes what. If you are unsure whether the problem is inside your unit or in a shared line, call us, describe what you see, and we can explain what is typically involved before anything proceeds.

Need to discuss an electrical concern or planned project?

Request service

Related pages

Call (954) 481-0910