Electrical help for homes and businessesRequest service
Emergency ElectricianCall (954) 481-0910
Emergency Electrician electrician at work in a South Florida property

Urgent Repair

Tenant or Landlord: Who Fixes a Power Problem?

When the power fails in a leased commercial space, the first practical question is often who is supposed to handle it. The answer sits in the lease, and it varies. This page describes common patterns in general terms, explains what to read, and tells you what to do while the question is being settled.

Safety comes before the question of who pays

Arguments about responsibility can wait. A person in danger cannot. If anyone has been shocked, if there is smoke, a burning smell, sparks, flames, or water in contact with electrical equipment, call 911 first and move people away from the area. Do not wait for the landlord to call back, and do not hesitate because you are unsure whose equipment it is. A fire department response is not something a lease can delay.

Once the scene is safe, the next step is to decide whether the problem is the utility, the building, or your own space. Look at the neighbors. If the whole street or the whole complex is dark, the power company's outage line is the right call. If only your suite is dark, the cause could be a tripped breaker in your own panel, a problem in a shared electrical room, or a fault in the building's service. Each of those may fall on a different party.

For the moment, your priorities are to protect people, protect perishable stock and equipment where you safely can, and gather information. Responsibility is a question for after you have a clear picture of what is wrong, and it is easier to answer when you have a written finding from a technician in hand.

Emergency Electrician dispatch crew meeting beside a branded van in South Florida
  • Injury, smoke, fire, sparks, or water on live equipment: call 911 first.
  • Whole area dark: contact the power company about the outage.
  • Only your suite dark: look at your own panel from the outside, without opening covers, and contact the property manager.
  • Do not enter locked electrical rooms or force doors to reach equipment.

Why the lease is the first document to read

Commercial leases are contracts, and they are written differently from residential agreements. There is no single rule that tells a tenant or a landlord who handles a failed breaker or a dead panel. Many leases divide responsibility by location, with the landlord handling the building structure, the main service and common areas, and the tenant handling everything inside the leased space. Others make the tenant responsible for nearly all building systems that serve the unit, including electrical, and some shift costs through common area charges.

Look for sections titled repairs, maintenance, utilities, services, alterations, common areas, and default. Look for any language about electrical systems, panels, meters, emergency repairs, and notice. Pay attention to who has the right to hire a contractor, whether the landlord must approve contractors, and whether the tenant has to give written notice before making repairs at its own cost.

This page does not give legal advice and cannot tell you what your lease means. If the lease is unclear, a real estate attorney or the property manager can help. What an electrician can do is describe what was found and where, which turns the argument from opinion to fact. The technician's findings, written and specific, are often what both sides need to resolve the question.

Common ways responsibility is divided, described generally

In many multi-tenant buildings, the landlord is responsible for the utility service entrance, the main switchgear or main distribution panel, shared risers and feeders, common area lighting, and the building's life safety systems. The tenant is responsible for the panel inside the suite, the branch circuits, outlets, switches and light fixtures inside the unit, and equipment the tenant installed or owns, such as signage, kitchen equipment, server racks and process machinery.

In a single-tenant building under a triple net or similar arrangement, the tenant may be responsible for nearly everything on the property side of the meter, including the service equipment and parking lot lighting. In a lease described as gross or modified gross, the landlord may keep more responsibility. These labels are shorthand and do not replace reading the lease itself. The actual words in the repair and maintenance sections control.

Where the line gets blurry is at the boundary. A feeder that runs from the landlord's main gear to the tenant's panel, a meter base that serves one unit, a disconnect on the roof, or a subpanel in a shared closet may fall on either side. Those are the places where documentation, labeling and a written finding from an electrician matter the most.

EquipmentOften handled byWhy it varies
Utility service and meter baseLandlord or utilityDepends on whether the building has one meter or several
Main switchgear or distribution panelLandlord, sometimes tenant in a single-tenant leaseLease type and building setup
Panel inside the suiteTenant or landlordSome leases treat it as building equipment, others as tenant property
Branch circuits, outlets, switchesUsually tenantOften tenant under repairs clause
Common area and parking lightingLandlord, sometimes through common chargesCommon area costs may be shared
Emergency lights and exit signsVariesMay be a landlord life safety item or tenant item inside the suite
Tenant equipment and signageTenantInstalled or owned by the tenant

Utility, building, or unit: working out where the fault sits

The location of the fault often determines who has to act. A technician will usually work from the meter inward. If power is present at the meter and at the building's main equipment but absent in your suite, the problem lies somewhere between, which could include a feeder, a shared breaker, or the unit's panel. If power is missing at the building's main equipment, the problem is in the building's service or in the utility's supply.

A tripped main breaker in your suite panel may be your side. A tripped breaker in a shared electrical room that serves several tenants is more likely the landlord's. A dead feeder is harder to place without testing. This is why a physical diagnosis comes before a conclusion about responsibility, and why it helps to have access to the electrical room when the technician arrives. See our page on arranging access for an electrical visit.

A technician can tell you what they found, where, and what would be needed to repair it. They will not decide whose lease obligation it is, and you should not ask them to. What they can do is write down the location, the equipment, the condition and the cause as best they can determine, so you and the landlord can look at the same facts.

Notice: telling the landlord quickly and in writing

Many leases require tenants to give prompt written notice of a problem in the building systems. Even if yours does not, giving notice quickly is sensible. A phone call to the property manager is fine to start, but follow it with an email or letter that states the date and time, what happened, what is affected, and what you have done so far. Keep a copy.

A good notice is short and factual. Say what you saw, such as a dead panel, a burning smell, or a loss of power to the suite. State whether the building or neighboring suites appear affected. Say whether you have called an electrician or the utility. Ask for the landlord's instructions and for contact details for after hours. Avoid assumptions and avoid blame. You are creating a record, not an argument.

If the landlord does not respond and the lease allows tenant self-help repairs for emergencies, the lease may describe how that works, such as notice periods and reimbursement conditions. Do not assume that you have those rights without reading the clause. If a lease requires landlord approval before hiring a contractor, follow the process or, if there is a real emergency, document why it could not be followed.

  1. Make sure people are safe and call 911 if there is any hazard.
  2. Call the property manager or landlord's emergency number.
  3. Follow up in writing with date, time and a factual description.
  4. Arrange an electrician and share their written findings.
  5. Keep receipts, notes and photographs together in one place.

When the landlord has to act, and when you do

If the technician finds that the problem is in equipment the landlord controls, such as the main switchgear or a shared feeder, the landlord generally needs to arrange the repair. Your role is to give notice, provide access, and ask for a timeline. You can also ask whether the landlord will authorize you to have your own electrician work with theirs, which can speed things up.

If the problem is inside your suite, the lease probably puts the repair on you, though not always. Even then, many leases require that electrical work be done by qualified contractors and that permits be pulled where needed. Check whether the landlord wants to approve the contractor, whether the building has rules about work hours, and whether insurance certificates have to be provided to the property manager before the work.

Where the fault is on the boundary, it can help to agree on a temporary arrangement. For example, the electrician may isolate the fault and restore power to the rest of the suite while the question of who pays for the permanent repair is discussed. Talk with the electrician about what is safe and what can be done in stages.

Permits, building rules and who is allowed to open what

Electrical work in commercial buildings often needs a permit, and some building rules limit who can work on shared equipment. A landlord may want to control access to the main electrical room, the roof, or the riser. A tenant who opens a locked cabinet or tries to bypass a landlord's equipment can create safety problems and lease problems.

A property manager may have a preferred contractor, a building engineer, or a maintenance staff member who handles routine issues. Ask who they want involved. For an emergency, it is reasonable to ask whether the building engineer can meet the electrician at the electrical room. If the landlord cannot be reached, the electrician can explain what they are able to do from your side of the demarcation and what must wait for access.

Permits are the electrician's and owner's responsibility under local rules, and the permit office in the city or county sets requirements. For smaller repairs, such as replacing a failed breaker, the rules may differ from those for replacing a panel or a feeder. Ask the dispatcher about permit requirements when you describe the job. For more, see permits for emergency electrical work.

Business interruption and shared costs

A power loss affects more than the electrical system. It can close a business, spoil inventory and disrupt customers. Tenants often ask whether they are entitled to a rent reduction or compensation when the landlord's equipment fails. Some leases address that, many limit it, and some are silent. That is a legal and contractual matter and this page cannot tell you what you are entitled to.

What you can do is document the interruption. Record when power was lost, when it was restored, what operations stopped, and what the technician found. Keep staff schedules and lost inventory records separate and factual. Photographs help. See our guide on documenting a business outage for records for a more complete list.

If your business has insurance, tell your agent about the outage early and ask what information they will want. This page makes no claims about what any policy covers. Do not assume that an outage is or is not covered. Ask the insurer directly, and keep the electrician's written findings, since they often form part of what an insurer or a landlord asks to see.

Condos, plazas, office towers and single-tenant buildings

Building type shapes the usual pattern. In an office tower or large plaza, power is delivered to the building through large switchgear owned and maintained by the landlord, and each suite has its own subpanel. Problems at the building level affect many tenants at once, and the landlord's engineer or management company coordinates. Problems inside a suite are usually the tenant's to arrange.

In a strip center, each tenant often has a separate meter and service. A fault on the tenant's service equipment, such as a meter base or main disconnect, can be treated as the tenant's, though the lease controls. Shared parking lot lighting and shared signage are often the landlord's, sometimes billed back through common area charges.

In a single-tenant building, particularly with a long-term lease, the tenant often carries the whole electrical system. In a condominium unit used commercially, the association's documents and the declaration may set the line. Our pages on condo association electrical emergencies and condo common area outages describe how associations tend to handle shared equipment.

What to have ready when you call the electrician

Whoever arranges the visit, the electrician will need certain information. Have the address, suite number and a contact person on site. Say whether the building is multi-tenant and whether there is a landlord or property manager who controls the electrical room. Say whether other suites are affected. Have a copy of the relevant lease pages handy, but do not expect the technician to interpret them.

Mention what the problem looks like. Is the entire suite dark or only some circuits. Did a breaker trip. Was there a bang, a burning smell, or a storm. Has anything been added recently, such as new equipment. If anyone has already tried to reset a breaker or has changed anything, say so honestly. This helps the technician avoid a wasted step and, more importantly, avoid a hazard.

Expect the dispatcher to explain the service call charge before sending anyone. Quotes for repairs are given by phone, and larger jobs need an on-site look first. If landlord approval is needed before work begins, tell the dispatcher so scheduling and access can be planned. When you are ready, call and describe the situation.

After the repair: keeping the record straight

When the lights are back, the work is not quite done. Ask for a written summary of what was found and what was done. A good report names the equipment, the location, the condition, the cause as determined, and any limits on what could be tested. If the technician recommends further work, ask for that in writing too, and keep it separate from what was completed.

Share the summary with the landlord or property manager, whichever side did not arrange the repair. If cost sharing is going to be discussed, the report is the best starting point. Keep invoices, permit records and photographs together. If something remains unresolved, list it with dates, so that nothing is lost between your team and the building.

Finally, learn from the event. Ask the electrician which parts of the system are your responsibility and which are not, based on what they saw. Ask where the main shutoff and panels are, and make sure staff know. Planning ahead makes the next problem less confusing. For help thinking about prevention see electrical checks that support business continuity.

Questions people ask

Who is responsible when the power goes out in my leased space?

It depends on the lease and on where the fault is. In many buildings the landlord handles the main service and shared equipment, and the tenant handles the panel and circuits inside the suite. Some leases put nearly everything on the tenant. Read the repair and maintenance sections, and use an electrician's written findings to pin down where the problem sits.

Can I hire my own electrician without asking the landlord?

Your lease may require landlord approval or written notice before you hire a contractor, especially for work in shared equipment or electrical rooms. In a real emergency, call 911 for any danger and notify the landlord as soon as you can. Read the lease and document what you did and why. This page cannot give legal advice.

What if the landlord does not answer?

Keep trying the emergency number, send a written message, and note the times. If anyone is in danger, call 911. For the power problem itself, an electrician can often diagnose what is safe to do from your side. Do not force locks or enter electrical rooms you do not have access to. Review the lease for tenant remedies and consider legal advice.

Does the electrician decide who has to pay?

No. The technician finds the cause, describes what they found, and explains what a repair involves. Who pays depends on the lease and on agreements between you and the landlord. A clear written report helps both sides see the same facts, but the electrician does not interpret leases or decide disputes.

Will my business be compensated for the outage?

That depends on your lease, your insurance and the facts, and nothing here can predict it. Some leases limit landlord liability and some address rent adjustments. Document the interruption carefully, tell your insurance agent early, and ask what they need. Keep the electrician's findings, invoices and photographs in one place.

What if the problem is on the boundary between my panel and the building?

Boundary faults, such as a feeder from the landlord's gear to your panel, are the hardest to place. Have the electrician describe exactly where the fault is, photograph it where safe, and share the report with the landlord. A temporary arrangement may restore part of your power while the question of the permanent repair is settled.

Talk to Emergency Electrician

About "Tenant or Landlord: Who Fixes a Power Problem?": call and give us the details, and we will explain what is safe to do while you wait and what the visit would cover. Jobs that cannot be quoted blind need a look on site.

Related pages

  • Business Power Loss: Your business just lost power. Follow a safe first-hour sequence for owners and managers: safety, isolating the cause, informing staff, and documenting.
  • Condo Emergency: Board members and managers: a call order for condo electrical emergencies, who handles shared rooms, what residents report, and what to document afterward.
  • Outage Records: What to record during a business power outage for managers, landlords and insurers: timelines, photos, losses and technician findings, with no coverage claims.
  • After-Hours Access: A smooth after-hours electrical visit depends on access. Learn what to arrange with keys, alarms, building managers and gates before the technician arrives.
  • Whose Repair: General responsibility basics for owned homes, rentals, and condos, so you know who to notify and what to tell the dispatcher before an electrician is sent.
  • Loss of Phase: One phase dropped in a three-phase business? Learn the warning signs, which motors to shut down, who to tell, and what is checked.

Need to discuss an electrical concern or planned project?

Request service
Call (954) 481-0910