Electrical help for homes and businessesRequest service
Emergency ElectricianCall (954) 481-0910
Electrical diagnostic camera, insulated tools, safety glasses, gloves, and Emergency Electrician branded equipment

Safety and Guides

What to Tell the Electrician on the Phone

The call to an electrician's dispatcher is where the visit is planned. Clear symptoms, a timeline, and a few photographs help the dispatcher send the right technician with the right tools. This guide lists what to say, what to avoid guessing, and what to expect in return, starting with safety.

Safety before the call

Before you call an electrician, ask whether anyone is in danger. If there is fire, smoke, flames, sparks that keep happening, a person who has been shocked, a wire down near people, or water around live electrical equipment, call 911 first. An electrician is not a substitute for the fire department, and a dispatcher will tell you the same thing. Once the scene is safe, call.

If the problem is more stable, such as a breaker that will not reset or an outlet that feels warm, use the time before the call to make things safer. Stop using the affected circuit. Unplug devices only if you can do it without touching anything hot or damaged. Keep children and pets away. Do not open the panel or any cover. Do not use water near the equipment.

Tell the dispatcher what you have done, including anything that went wrong. If you reset a breaker three times, say so. If you unplugged a device, say which one. If you touched a hot outlet, say so. The dispatcher is not there to judge. These facts affect what the technician brings and how carefully they approach the job, and some can affect your safety.

Emergency Electrician technician installing a pendant light in a bright coastal home
  • Fire, smoke, shock injury or downed wire: 911 first.
  • Stop using a circuit that smells, feels hot or trips.
  • Do not open the panel or cover plates.
  • Be honest about what you have already tried.

Start with the headline symptom

Open the call with one sentence that names the main problem. For example, half the house has no power, a breaker keeps tripping, there is a burning smell near the panel, an outlet is hot, the lights flicker whenever the air conditioner starts, or the power is out in the shop but the neighbors have power. A clear headline lets the dispatcher sort the call quickly and ask the right questions.

Then add the details. Which part of the property is affected, all or part. Which rooms, which equipment. Whether the problem is constant or comes and goes. Whether it is getting worse. Whether there is a smell, a sound, a heat or a visible mark. Whether the lights are dim or out. Use the words you would use with a friend, not technical terms you are unsure of.

Resist the urge to name the cause. Saying the panel is bad or the meter is broken is a guess, and a wrong guess can send the technician down the wrong path. Describe what you see and let the technician work out why. If you have a theory, offer it as a theory, for example, it started right after we plugged in a new freezer, which is a useful fact.

Give the timeline

Timing is one of the most useful pieces of information. Say when the problem started, to the best of your knowledge. Was it sudden or gradual. Did it follow a storm, a lightning strike, a loud bang, a power flicker, a utility outage or the return of power. Did it follow work on the property, new equipment or an appliance being turned on.

Say whether it has happened before, and how often. A breaker that has tripped once is different from one that has tripped every week for a month. A light that flickers occasionally is different from lights that dim every time a motor starts. Mention if the problem is worse at certain times of day or in certain weather, such as in heavy rain or when the air conditioner runs.

If the problem is intermittent, say how long it lasts and what makes it stop. If it stops by itself, say so. If you did something to make it stop, such as resetting a breaker, say what and how many times. Intermittent faults are harder to find, and the history you give can save the technician time. Keep a note of the times if you can, as in the guide on documenting a business outage.

Describe the building and the equipment

The kind of property shapes what the technician needs to bring. Say whether it is a house, a condo, an apartment, a store, an office, a restaurant or a warehouse. Say roughly how old the building is, if you know, and whether it has been renovated. An older home with an original panel and a newer building with a modern panel may need different parts and approaches.

Describe the panel if you can, from the outside. Is it inside or outside, in a garage, closet or hallway. Is it a single panel or are there subpanels. Do you know the brand name printed on the cover. Do you know whether it has fuses or breakers. A photograph helps with this. Do not open the panel to look. The brand and general appearance of the outside are enough for now.

Mention major equipment that may be involved, such as an air conditioner, a pool pump, a generator, an electric vehicle charger, solar panels, a walk-in cooler, a welder or a server room. Say whether the service is single-phase or three-phase if you know it, since that changes what the technician needs. If you do not know, say so. The dispatcher will ask for what they need.

Photos that help, and photos that do not

A few photographs can make a call much more effective, but only if they are taken safely. Useful photos include the outside of the panel with the door closed, the area around it, the meter and meter base from a distance, any visible scorch marks, melted plastic, water stains or damaged cords, the face of the affected outlet or switch, and the equipment label on a device that is failing. Take them from a safe position with a steady hand and good light.

Do not open a panel, remove an outlet cover, or reach into a box to take a better picture. Do not stand in water. Do not stand next to a damaged meter or a downed wire. Do not touch anything hot or wet. If a technician wants a closer look, they will take it with the right equipment and precautions.

Ask the dispatcher how to send the photographs. Some can be sent by text or email, and some are better shown when the technician arrives. Do not post them online. If you are not comfortable taking photos in the current conditions, skip them. Words are enough for a first call. For more guidance see photographing the damage before repairs.

  1. Outside of the panel with the door closed.
  2. The area around the problem, to show the setting.
  3. Any visible damage, from a safe distance.
  4. The label on a failing appliance or device.
  5. The meter and meter base from a distance, if it is involved.

Sounds, smells and sensations

Your senses are useful data. Tell the dispatcher what you hear. Buzzing, humming, crackling, popping, or a loud bang each point in different directions. A hum from a panel can be a loose connection or a heavily loaded breaker. A crackling sound can be arcing. A pop followed by darkness can be a tripped breaker or a failed component.

Tell the dispatcher what you smell. A hot plastic smell, a fishy smell, an ozone smell like after a lightning storm, and a smell of burnt dust are all possibly relevant, and a strong smell that persists after you stop using the circuit is a warning. Say where the smell is strongest. If it is at the panel or in a wall, say so. If the smell is strong, call 911 first.

Say what you feel, without touching anything unsafe. A wall that is warm, a switch plate that feels hot, a tingle when touching an appliance, or a shock from a faucet or pipe are all important. If you felt a shock, say when, where and how strong. These can point to ground faults, loose neutrals or wiring defects. Do not try to test by touching again. Say what happened once.

What has been tried, and what has not

Tell the dispatcher what you have done. Breakers reset, devices unplugged, fuses replaced, the main switched off, a generator started, the utility called. Say what happened after each step. This helps the technician avoid repeating steps and see the sequence of events.

Be clear about what has not been done, too. If you have not called the utility, say so. If you have not checked with the landlord or the association, say so. If you have not been able to reach the panel because it is locked or blocked, say so. A dispatcher can help you work through the gaps and sometimes can tell you which call to make first.

If someone else, such as a handyman or a previous contractor, worked on the electrical system recently, mention it. Do not hide earlier work, even if it was not done by a professional, because unusual wiring can matter a lot to safety. Technicians are used to finding odd things and will usually be more helpful if they know in advance. For general reading see what never to do in an electrical emergency.

Access, contacts and decision makers

Give the address, the entrance, and any gate or security details. Give a phone number that will be answered, and the name of the person who will be on site. Say if that person can authorize the work or if someone else needs to be reached. In a rental or leased space, say who the landlord or property manager is and whether they must approve work.

Say if the electrical panel is in a locked room or shared area. Say if keys, alarm passphrases or building escorts are needed. Say if there are pets, children, or people with medical needs who depend on power. If power is critical for medical equipment, tell the dispatcher at the start, and tell them what your backup plan is, if any.

If it is after hours, think through how the technician will get in. Our guide on arranging after-hours access for an electrical visit covers this in detail. A few minutes spent on access before the visit can save a lot of waiting on the day.

What the dispatcher will tell you

Expect the dispatcher to ask questions, give safety instructions and explain how the visit works. They will explain the service call charge before anyone is dispatched. They will say that quotes for repairs are given by phone, and that complicated jobs need an on-site visit before a quote can be given. They will not read a price list over the phone for a problem they cannot see.

They may ask you to do safe things while you wait, such as keeping a circuit switched off, keeping people away from an area, or stepping outside. They may tell you not to do things, such as resetting a breaker again. Follow the instructions. They are based on your description, so if conditions change, call back.

They cannot promise a technician at every hour and place, and they should not promise an arrival time they cannot keep. Ask what the next step is, what information they need from you, and how you will be contacted. Write down the name of the person you spoke with, and the time. If your situation worsens, call 911 if there is danger, and call the dispatcher again.

Questions worth asking on the call

The call goes both ways. Ask what the service call charge covers and when it is explained, since it should be before dispatch. Ask whether the technician can start work on the spot or whether a second visit may be needed for parts or permits. Ask whether you should keep the power off to a circuit or the whole building while you wait. Ask what the technician will need access to.

Ask about permits if the job may need one. Ask whether the technician will provide written findings, which are useful for landlords and for records. See questions to ask before dispatch for a fuller list. If you are comparing options, ask the same questions of each, and write down the answers.

Be wary of anyone who gives a firm price for a complicated problem without seeing it, who pressures you to approve work on the phone before a diagnosis, or who is vague about who is coming. A reasonable dispatcher will explain how quotes work and will not rush you into a decision. If you are not comfortable, say so and ask for time to think.

Before the technician arrives

While you wait, prepare the area. Clear the path to the panel and keep it dry and lit. Move valuables and breakable items away from the work area. Secure pets. Keep children away. Have a flashlight. If the building is dark, do not use candles near a possible electrical or gas problem. Keep your phone charged and answer calls from unknown numbers.

Write a short note with the facts you have given, so that you can hand it to the technician: symptoms, timeline, what was tried, and who to call. Gather any paperwork that may help, such as a previous inspection report, a panel directory, or a lease clause on electrical responsibilities. Keep it simple.

Meet the technician at the door, if safe, and give the history. Ask them to explain what they find in plain words and to show you the problem if safe. See what to expect when a technician arrives for the arrival part of the process.

Ready to call

If you are ready to call, have the address, the headline symptom, the timeline and a contact number at hand. Mention anything that raises the urgency, such as heat, smell, sparks, water, or a person with medical equipment. Describe what you can see and hear, and say what you have already done.

The service call charge is explained before anyone is dispatched. Quotes for repairs are given by phone, and complicated jobs need an on-site visit. Nobody can promise a technician at every hour and place, so tell the dispatcher about your situation honestly and ask what the best next step is.

If anyone is in danger, call 911 first. If the problem is stable, call and describe what is happening. A clear description is the quickest way to get the right help.

Questions people ask

What is the most helpful thing to say when I call?

Start with one sentence naming the main problem, such as half the house has no power or a breaker keeps tripping. Then give the timeline, what you saw, heard and smelled, what you tried, and the address and a number that will be answered. Avoid guessing at causes. Say first if anyone is in danger.

Should I send photos, and how?

Photos help if taken safely. Good subjects are the outside of the panel with the door closed, visible damage from a distance, a failing appliance label and the meter from a distance. Never open a panel, stand in water or go near damaged equipment for a photo. Ask the dispatcher how they prefer to receive images.

Will the dispatcher give me a price on the phone?

The dispatcher will explain the service call charge before anyone is sent. Quotes for repairs are given by phone once the problem is described, and complicated jobs need an on-site visit before a quote can be given. Be cautious of anyone who quotes a firm figure for a problem they have not seen.

What if I already reset the breaker or tried a fix?

Say so, with details: how many times, what happened, and what changed. Repeated resets of a breaker that trips can matter to the technician and to safety. The dispatcher is not judging, they need the facts. If anything felt hot or smelled burnt, say that too, and stop using the circuit.

What if I do not know my panel or wiring type?

That is fine. Describe what you can see from the outside, such as where the panel is and the brand name on the cover, and say how old the building is. Do not open the panel to look. The technician can identify the rest on site. A photograph of the closed panel and its surroundings is helpful.

Who needs to be there when the technician arrives?

Someone who can give access and, ideally, approve the work. In rentals and leased spaces, the landlord or manager may need to approve work or open an electrical room. Tell the dispatcher who will be on site, their number, and any gates, alarms or locked rooms. Keep pets and children away from the work area.

Talk to Emergency Electrician

If "What to Tell the Electrician on the Phone" matches what is happening, call and describe it plainly: the room, the breaker, any burning smell or tripped circuit. We explain what the repair would involve before a visit is set.

Related pages

  • 911 Script: Calling 911 about sparks, smoke, a shock or a downed wire? These are the facts that help dispatch most: address, hazard, people at risk and power status.
  • Pre-Dispatch Questions: How the service call charge works, how quotes are given by phone, what an on-site visit involves, and questions worth asking before an electrician is sent.
  • When They Arrive: The arrival routine for an emergency electrical visit: identification, safety isolation, testing, plain-language findings and what to have ready.
  • Troubleshooting Visit: A walkthrough of an urgent electrical troubleshooting visit: arrival, safety isolation, testing, findings explained in writing, and how phone quotes work.
  • After-Hours Access: A smooth after-hours electrical visit depends on access. Learn what to arrange with keys, alarms, building managers and gates before the technician arrives.
  • Call Order: Electrical trouble, three possible calls. A plain decision order for when to dial 911, when to phone the power company, and when to call an electrician.

Need to discuss an electrical concern or planned project?

Request service

Related pages

Call (954) 481-0910